Notices
2005-2014 Mustangs Discussions on the latest S197 model Mustangs from Ford.
Sponsored by:
Sponsored by:

Help diagnosing CEL codes

Thread Tools
 
Search this Thread
 
Old 09-01-2010, 05:44 PM
  #1  
Alec
5th Gear Member
Thread Starter
 
Alec's Avatar
 
Join Date: Aug 2009
Location: Philadelphia, PA
Posts: 4,256
Default Help diagnosing CEL codes

I was driving to the gym today and noticed that my CEL popped up. Terrific! Once I stopped, I checked the codes with my dashscanner and got these 4:

P1000
P2195
P2196
U1900


Anyone?
Alec is offline  
Old 09-01-2010, 06:44 PM
  #2  
2005Redfire6
6th Gear Member
 
2005Redfire6's Avatar
 
Join Date: Jul 2008
Location: Acworth, GA
Posts: 12,259
Default

All 4? :| Google it.
2005Redfire6 is offline  
Old 09-01-2010, 06:50 PM
  #3  
Alec
5th Gear Member
Thread Starter
 
Alec's Avatar
 
Join Date: Aug 2009
Location: Philadelphia, PA
Posts: 4,256
Default

Yeah, it seems like 2 of them are non-issues and the other 2 are maybe running lean/rich. Just wanted to see if anyone has had any experience with them
Alec is offline  
Old 09-01-2010, 08:21 PM
  #4  
SpartaPerformance
4th Gear Member
 
SpartaPerformance's Avatar
 
Join Date: Apr 2010
Location: Long Island, New York
Posts: 1,291
Default

Did you get a new tune recently? Sounds like it might be that.
SpartaPerformance is offline  
Old 09-01-2010, 08:32 PM
  #5  
Alec
5th Gear Member
Thread Starter
 
Alec's Avatar
 
Join Date: Aug 2009
Location: Philadelphia, PA
Posts: 4,256
Default

I had to remove the CAI & tune for inspection over a month ago and then reinstalled them. But I've been running the same Bama 93 tune for months and months. I'm going take the highway tomorrow on the way to school to hopefully go through a drive cycle. Couldn't hurt right? If not, I'll give AM a call

For what it's worth, I also checked my CAI this afternoon to make sure everything's ok and tightened all the clamps. Nothing stood out to me

Last edited by Alec; 09-01-2010 at 08:34 PM.
Alec is offline  
Old 09-02-2010, 07:04 AM
  #6  
Alec
5th Gear Member
Thread Starter
 
Alec's Avatar
 
Join Date: Aug 2009
Location: Philadelphia, PA
Posts: 4,256
Default

So the one that's throwing a CEL is P2196- o2 sensor signal biased/stuck rich (b1,s1)
Alec is offline  
Old 09-02-2010, 10:12 AM
  #7  
SpartaPerformance
4th Gear Member
 
SpartaPerformance's Avatar
 
Join Date: Apr 2010
Location: Long Island, New York
Posts: 1,291
Default

Originally Posted by alec231236
So the one that's throwing a CEL is P2196- o2 sensor signal biased/stuck rich (b1,s1)
Right but 2195 is lack of switching system lean, so most likely it's in the tune or the PCM is having a brain fart from the return to stock and the reboot. I'ld clear the codes. Reload the tune properly and take for a drive and see what happens.
SpartaPerformance is offline  
Old 09-02-2010, 10:54 AM
  #8  
Alec
5th Gear Member
Thread Starter
 
Alec's Avatar
 
Join Date: Aug 2009
Location: Philadelphia, PA
Posts: 4,256
Default

Originally Posted by SpartaPerformance
Right but 2195 is lack of switching system lean, so most likely it's in the tune or the PCM is having a brain fart from the return to stock and the reboot. I'ld clear the codes. Reload the tune properly and take for a drive and see what happens.
That's what Im going to do. I cleared the code and am going to reload the tune when I get home. It's running strong otherwise
Alec is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BOB ROME
5.0L (1979-1995) Mustang
3
07-26-2023 01:54 PM
mrtrodonet
V6 (1994-2004) Mustangs
3
09-19-2020 03:12 PM
CS2007
General Tech
8
06-25-2019 09:45 PM
Dathan
V6 (1994-2004) Mustangs
4
10-05-2015 05:52 AM
ChampInSD
5.0L GT S550 Tech
13
10-02-2015 04:55 AM



Quick Reply: Help diagnosing CEL codes



All times are GMT -5. The time now is 03:00 PM.