Pinion Angle
Thread Starter
1st Gear Member
Joined: May 2010
Posts: 78
From: Maryland
Pinion Angle
Is anyone familiar with setting the pinion angle? I just got an upper control arm for my 2008 and lower control arms both made by competition engineering. I adjusted my pinion to negative 2 degrees. I went to the track tonight and noticed that the wheel hop is gone but i ran 3 tenths slower than with the stock suspension... WTF? Im spinning like crazy!!!! it was about 15 degrees hotter outside so i can see that slowing me down a little but 3 tenths with no wheel hop? HELP ME PLEASE. BTW this is with street tires also.. yeah i know, i need to get some stickys. What is everyone setting their pinion angle to ?
Cut & Paste Expert
Joined: May 2007
Posts: 13,322
From: NW Arkansas
Yep.
Here ya go.
But ya need one of these...
BTW
The LCAs need to be exactly the same length so your stang does
not 'dog track'.
Here ya go.
But ya need one of these...
BTW
The LCAs need to be exactly the same length so your stang does
not 'dog track'.
Last edited by 157dB; Sep 25, 2010 at 09:58 AM.
Thread
Thread Starter
Forum
Replies
Last Post
KingRando
2005-2014 Mustangs
5
Oct 2, 2015 08:06 AM