X3xMONGOOSEx3X

RoadRunner engine

mighted1987

beep beep

xkape

how much you sell the car as is for? I have a black one, contrast in the driveway could be good.

mighted1987

Not sure we have the same kind of price value from over here vs usa? I paid it 27k. in may..guess ill have to lose a couple grand, it got 26,000 kms, anyway havingthe car sell to usa would require re inspection car got no cats etc, ill just get it fixes and park it and announce it, but were alreeady july, starting to be late summer trade

jsimmonstx

If you're gonna repair the motor, just get a 5.0 and drop it in.

mighted1987

id need to change all the wiring too and computer? + my m90 wouldnt bolt on it?

moosestang

Yes you would and no it wouldn't. The cheapest/fastest route is a used 4.6, but you need to determine why cylinder 6 has low compression. it could be the heads. I would retest compression in cylinder 6 and pour a teaspoon of oil in the spark plug hole to see if the compression comes up. If it does, then you know it's a ring/piston problem.

mighted1987

Will go stock used 4.6l without the pulley, and leave them my block until they get time to find and fix the probleme..either way it cant be worst then the number i was doing and mph on 1/4 and 1/8 mile