Seat Belt Holder on Seat
#1
Seat Belt Holder on Seat
Ever since I went from the SN-95 to the S197, this has been a pet peeve of mine.
In the 1999-2004 mustangs there was a plastic loop attached to each seat. The seatbelt threaded through it and to grab the belt, you just had to reach up next to your head.
In my 2007 convertible, I have to twist my body and reach back behind me to get the belt. It's really annoying to me.
Has anyone here managed to take one of these off of an older model and make it work with the S197? Is there anyone who sells such a product?
Thank you.
In the 1999-2004 mustangs there was a plastic loop attached to each seat. The seatbelt threaded through it and to grab the belt, you just had to reach up next to your head.
In my 2007 convertible, I have to twist my body and reach back behind me to get the belt. It's really annoying to me.
Has anyone here managed to take one of these off of an older model and make it work with the S197? Is there anyone who sells such a product?
Thank you.
#2
You should have a strap that has a magnet holding it to the lower side of the seat, this is what you run your seat belt through, so you can just reach back at the bottom to grab the belt
Last edited by waykooljr; 07-31-2012 at 03:31 PM. Reason: added picture
#5
#6
On my '11, I just reach back along the door sill plate and grab the belt there....makes it easy but took time to train myself not to reach over my shoulder.
#7
https://mustangforums.com/forum/2005...-mustangs.html
#8
Here's a cool thread that I think the seat belt strap is mentioned, along with some other things you might not have known.
https://mustangforums.com/forum/2005...-mustangs.html
https://mustangforums.com/forum/2005...-mustangs.html
#9
Ever since I went from the SN-95 to the S197, this has been a pet peeve of mine.
In the 1999-2004 mustangs there was a plastic loop attached to each seat. The seatbelt threaded through it and to grab the belt, you just had to reach up next to your head.
In my 2007 convertible, I have to twist my body and reach back behind me to get the belt. It's really annoying to me.
Has anyone here managed to take one of these off of an older model and make it work with the S197? Is there anyone who sells such a product?
Thank you.
In the 1999-2004 mustangs there was a plastic loop attached to each seat. The seatbelt threaded through it and to grab the belt, you just had to reach up next to your head.
In my 2007 convertible, I have to twist my body and reach back behind me to get the belt. It's really annoying to me.
Has anyone here managed to take one of these off of an older model and make it work with the S197? Is there anyone who sells such a product?
Thank you.
Thread
Thread Starter
Forum
Replies
Last Post
MustangForums Editor
GT350 S550 Tech
1
09-29-2015 03:29 PM
autoedit
General Tech
0
09-27-2015 06:37 PM