Help with ARH Headers and Midpipe!
09-10-2012, 11:38 AM
5th Gear Member
Join Date: Aug 2010
Location: North Carolina
Posts: 3,874
Can't blame me for trying right!? lol
09-13-2012, 08:16 PM
1st Gear Member
Thread Starter
Join Date: Sep 2012
Location: PA
Posts: 53
Would it be possible to buy a stock H pipe and have a shop fit it to my long tubes?
09-13-2012, 08:17 PM
4th Gear Member
Join Date: Feb 2008
Location: Georgia
Posts: 1,761
Anything is possible when it comes to metal and welding, ha..
09-13-2012, 08:24 PM
1st Gear Member
Thread Starter
Join Date: Sep 2012
Location: PA
Posts: 53
Haha true. Do you think it would be cheaper than buying a catted x/h pipe? I'm literally going to use it for emissions only
09-13-2012, 08:26 PM
4th Gear Member
Join Date: Feb 2008
Location: Georgia
Posts: 1,761
If you find a really cheap used stock one.. I can't imagine a typical metal shop charging more than 50 dollars to cut and weld up some mounting plates to it... That's about what I would charge.. Doesn't have to be pretty or strong, just has to work for a little while, ha
09-13-2012, 08:35 PM
1st Gear Member
Thread Starter
Join Date: Sep 2012
Location: PA
Posts: 53
Yeah, I don't really care how it looks or anything. I found one locally for $100...worth it?
09-13-2012, 08:45 PM
4th Gear Member
Join Date: Feb 2008
Location: Georgia
Posts: 1,761
See if you can talk it down to 70
09-13-2012, 08:50 PM
1st Gear Member
Thread Starter
Join Date: Sep 2012
Location: PA
Posts: 53
I don't mind paying $100 as long as it can definitely be modified for less than an extra $200
09-13-2012, 08:56 PM
4th Gear Member
Join Date: Feb 2008
Location: Georgia
Posts: 1,761
You'd have to find a welder that will do it for you.. I can't guarantee the price.. that's just what I would charge for an easy job like that..
09-13-2012, 09:25 PM
1st Gear Member
Thread Starter
Join Date: Sep 2012
Location: PA
Posts: 53
I may just have somebody cut the cats in half and weld them around my off road pipe.
09-13-2012, 08:26 PM
