600+ HP on a 2013 5.0
#1
600+ HP on a 2013 5.0
Hosted a dyno day for Saturday in West Texas and put the car on again. Only mods since 589hp was the JLT cold air intake for the vortech. Not even a retune, just the intake and car made 617 in video. That was my 3rd pull. the 2nd pull made 622. and the first pull made 611. I was happy because all I wanted to be able to do was say I had a 600hp car.
http://youtu.be/vPeKweIam0I
http://youtu.be/vPeKweIam0I
Last edited by awbreyjd; 12-03-2012 at 10:02 AM.
#3
#5
Hosted a dyno day for Saturday in West Texas and put the car on again. Only mods since 589hp was the JLT cold air intake for the vortech. Not even a retune, just the intake and car made 617 in video. That was my 3rd pull. the 2nd pull made 622. and the first pull made 611. I was happy because all I wanted to be able to do was say I had a 600hp car.
http://youtu.be/vPeKweIam0I
http://youtu.be/vPeKweIam0I
#6
With 4.56 gears , 6th is the gear you will hit the cars top speed in.
I wonder what the top speed would be with this setup?
At at 6000 rpm in 6th youd be at 167 mph, 7000 rpm youd be at 195 mph, at 7500 youd be at 209 if the hp can overcome the wind resistance.
I wonder what the top speed would be with this setup?
At at 6000 rpm in 6th youd be at 167 mph, 7000 rpm youd be at 195 mph, at 7500 youd be at 209 if the hp can overcome the wind resistance.
#7
well I dont wanna spin the driveshaft fast enough to max out 6th. with 4.56 gears its gonna really be spinning. but yea the gears come really quick. its set up to be right at redline at the quarter mile in 5th. when I start hitting the limiter I will change to 4.30's.