Brake Calipers and Spinners/Knockoffs -- Done!
#1
Brake Calipers and Spinners/Knockoffs -- Done!
Hey everyone,
I finally got around to painting my brake calipers. I bought the paint kit from G2 and followed the directions. I didn't take off the calipers but I did mask out everything else. While I had the wheels off anyway, I also added the BRS spinners/knockoffs I got. I've attached some pictures of the work in progress and the finished product.
Here's a little tip: if you put the paint in another container, make sure it is not plastic! That stuff ate right through my plastic cup I was using in 5 minutes!
Bryan
[IMG]local://upfiles/20227/37432C4329F44E80AE7A40F187D1CBD5.jpg[/IMG]
[IMG]local://upfiles/20227/6BDCF96185074C26936C0D05ED3BC7B9.jpg[/IMG]
[IMG]local://upfiles/20227/67FE3068F4F44DAEBEF8E45F0FDE1F2B.jpg[/IMG]
[IMG]local://upfiles/20227/2C2B203674BD4447BFC594786DE7CB3C.jpg[/IMG]
I finally got around to painting my brake calipers. I bought the paint kit from G2 and followed the directions. I didn't take off the calipers but I did mask out everything else. While I had the wheels off anyway, I also added the BRS spinners/knockoffs I got. I've attached some pictures of the work in progress and the finished product.
Here's a little tip: if you put the paint in another container, make sure it is not plastic! That stuff ate right through my plastic cup I was using in 5 minutes!
Bryan
[IMG]local://upfiles/20227/37432C4329F44E80AE7A40F187D1CBD5.jpg[/IMG]
[IMG]local://upfiles/20227/6BDCF96185074C26936C0D05ED3BC7B9.jpg[/IMG]
[IMG]local://upfiles/20227/67FE3068F4F44DAEBEF8E45F0FDE1F2B.jpg[/IMG]
[IMG]local://upfiles/20227/2C2B203674BD4447BFC594786DE7CB3C.jpg[/IMG]
#2
RE: Brake Calipers and Spinners/Knockoffs -- Done!
not too bad! just make sure to keep the wheel clean of brake dust! my bud did it to his gti and never cleans the wheels. but thats a vw lover for ya, no pride in the car!
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM
MustangForums Editor
General Tech
0
09-25-2015 06:42 PM