2005-2014 Mustangs Discussions on the latest S197 model Mustangs from Ford.

Thinking about swapping transmissions

Thread Tools
 
Search this Thread
 
Old Jan 12, 2013 | 05:29 PM
  #1  
vinnyzap93's Avatar
vinnyzap93
Thread Starter
1st Gear Member
 
Joined: Dec 2011
Posts: 103
From: New Jersey
Default Thinking about swapping transmissions

I have an 08 v6 with about 49000 miles on it. Thinking about putting a manual trans in and taking the automatic out. Good or bad idea? And how much could I get for my auto if I sold it?
Old Jan 12, 2013 | 06:02 PM
  #2  
xx10Gt's Avatar
xx10Gt
4th Gear Member
 
Joined: May 2012
Posts: 1,220
From: New York
Default

Originally Posted by vinnyzap93
I have an 08 v6 with about 49000 miles on it. Thinking about putting a manual trans in and taking the automatic out. Good or bad idea? And how much could I get for my auto if I sold it?
tha would be quite an expensive swap. ever think of doing a trade on a manual gt?
Old Jan 12, 2013 | 06:04 PM
  #3  
vinnyzap93's Avatar
vinnyzap93
Thread Starter
1st Gear Member
 
Joined: Dec 2011
Posts: 103
From: New Jersey
Default

Originally Posted by xx10Gt
tha would be quite an expensive swap. ever think of doing a trade on a manual gt?
A manual gt would cost me a couple grand and this swap could maybe be done even
Old Jan 12, 2013 | 06:11 PM
  #4  
moosestang's Avatar
moosestang
6th Gear Member
 
Joined: Sep 2006
Posts: 11,278
From: Gainesville, FL
Default

This was talked about on here recently. You need a lot more than just the transmission and clutch. You need pedal assembly, All the hydraulic lines, obviously the stick, plus a new drive shaft I'm sure. Not to mention a new pcm. Your stock computer is not going to be happy when it doesn't see your automatic.

Does the v6 transmission use a hydraulic clutch?
Old Jan 12, 2013 | 06:14 PM
  #5  
vinnyzap93's Avatar
vinnyzap93
Thread Starter
1st Gear Member
 
Joined: Dec 2011
Posts: 103
From: New Jersey
Default

Originally Posted by moosestang
This was talked about on here recently. You need a lot more than just the transmission and clutch. You need pedal assembly, All the hydraulic lines, obviously the stick, plus a new drive shaft I'm sure. Not to mention a new pcm. Your stock computer is not going to be happy when it doesn't see your automatic.

Does the v6 transmission use a hydraulic clutch?
As dumb as this may seem. I didn't even think of that. Maybe a trade up might not be such a bad idea
Old Jan 12, 2013 | 06:43 PM
  #6  
xx10Gt's Avatar
xx10Gt
4th Gear Member
 
Joined: May 2012
Posts: 1,220
From: New York
Default

yeah its not just the tranny that you need.
if anything i would trade up if it were me. actually, i had an auto 05 v6 and traded for a '10 gt manual. Best move ever, you'll love the power if you go with a gt.

If an 05-13gt is not in your budget, look at trading for a new edge, those are great cars too for sure
Old Jan 12, 2013 | 06:53 PM
  #7  
moosestang's Avatar
moosestang
6th Gear Member
 
Joined: Sep 2006
Posts: 11,278
From: Gainesville, FL
Default

Also, the resale value of your used automatic transmission is probably pretty depressing.
Old Jan 12, 2013 | 07:12 PM
  #8  
AzPete's Avatar
AzPete
4th Gear Member
 
Joined: Aug 2008
Posts: 1,214
From: Panama City, FL
Default

Plus selling/trading the car with the tranny swap would most likely be real hard. Always think....would you buy a car with that done to it.....before you do any permanent mods.
Old Jan 12, 2013 | 07:45 PM
  #9  
Andy13186's Avatar
Andy13186
4th Gear Member
 
Joined: Apr 2008
Posts: 1,792
Default

save up until you can trade for a manual gt..
Old Jan 12, 2013 | 08:50 PM
  #10  
Shawzie's Avatar
Shawzie
1st Gear Member
 
Joined: Oct 2012
Posts: 71
From: Alberta
Default

Sounds like a lot of work and headaches!



All times are GMT -5. The time now is 09:29 PM.