2005-2014 Mustangs Discussions on the latest S197 model Mustangs from Ford.

whiteline trans mount insert

Thread Tools
 
Search this Thread
 
Old May 1, 2014 | 12:56 PM
  #1  
12GTStang's Avatar
12GTStang
Thread Starter
 
Joined: Mar 2012
Posts: 15
From: Louisiana
Default whiteline trans mount insert

Since day 1 my car has had some occasional grinding into 5th gear. As long as I am very careful with my 5th gear shifts i can usually avoid the grind. Has anyone installed the whiteline transmission mount insert and had it fix this problem. From what I have read the 4th to 5th gear grind is a pretty common problem. My car is a 2012 gt with the 6 speed manual getrag.

Thanks!
Old May 1, 2014 | 09:08 PM
  #2  
12GTStang's Avatar
12GTStang
Thread Starter
 
Joined: Mar 2012
Posts: 15
From: Louisiana
Default

has anyone installed the insert?
Old May 2, 2014 | 07:53 PM
  #3  
jerstysu's Avatar
jerstysu
1st Gear Member
 
Joined: May 2013
Posts: 58
From: GA
Default

While I can't speak to the 5-6 grind (never experienced it) it did absolutely nothing for my 1-2 nibble. However it did "stiffen" the shift feeling tremendously. Especially shifting while turning.
Old May 3, 2014 | 12:03 PM
  #4  
12GTStang's Avatar
12GTStang
Thread Starter
 
Joined: Mar 2012
Posts: 15
From: Louisiana
Default

Originally Posted by jerstysu
While I can't speak to the 5-6 grind (never experienced it) it did absolutely nothing for my 1-2 nibble. However it did "stiffen" the shift feeling tremendously. Especially shifting while turning.
How bad is the increase in nvh, is it tolerable for everyday driving?
Old May 4, 2014 | 10:04 PM
  #5  
12GTStang's Avatar
12GTStang
Thread Starter
 
Joined: Mar 2012
Posts: 15
From: Louisiana
Default

bump.................
Old May 5, 2014 | 06:57 PM
  #6  
jerstysu's Avatar
jerstysu
1st Gear Member
 
Joined: May 2013
Posts: 58
From: GA
Default

It is tollerable...I only hear (not feel) it if I'm at a stop light with the clutch pedal released. When I first installed the NVH was too much for me. I cut the middle section out and basiclly all I have in are the two side pieces. I would say it kept 85-90% of the benefit of the bushing and added 5-10% NVH. I honestly don't hear it much anymore unless the radio is low.
Old May 6, 2014 | 10:56 AM
  #7  
12GTStang's Avatar
12GTStang
Thread Starter
 
Joined: Mar 2012
Posts: 15
From: Louisiana
Default

Originally Posted by jerstysu
It is tollerable...I only hear (not feel) it if I'm at a stop light with the clutch pedal released. When I first installed the NVH was too much for me. I cut the middle section out and basiclly all I have in are the two side pieces. I would say it kept 85-90% of the benefit of the bushing and added 5-10% NVH. I honestly don't hear it much anymore unless the radio is low.
good to know, Thanks man!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
Dec 27, 2021 08:09 PM
baddog671
Archive - Parts For Sale
20
Jul 26, 2016 01:20 PM
UrS4
S197 Handling Section
10
Oct 3, 2015 06:23 AM
guitarman376
4.6L (1996-2004 Modular) Mustang
0
Sep 30, 2015 05:54 PM
wraith777
General Tech
1
Sep 28, 2015 10:49 AM




All times are GMT -5. The time now is 10:17 AM.