2010-current S197 Appearance Section For all appearance mods to the 2010-2014 S197's

LED Reverse Lights

Thread Tools
 
Search this Thread
 
Old Sep 3, 2010 | 03:12 PM
  #11  
STANGmole's Avatar
STANGmole
2nd Gear Member
 
Joined: May 2010
Posts: 312
From: OR
Default

I replaced mine on a 2010 with bulbs from Superbright LEDs too but I bought different ones (12 LED 921-NW12 instead of the 9 LED ones listed above) in "natural white". The natural white is a good look...not too yellow...not too blue. I also bought matching license plate lamps in natural white (3910-NW6).

Four back up lamps and the two license lamps run just under $36 shipped.

Back Up Lamps

License Lamps...scroll down to 3910x6 Festoon
Old Sep 3, 2010 | 10:27 PM
  #12  
KutenStang's Avatar
KutenStang
1st Gear Member
 
Joined: Aug 2010
Posts: 69
From: Ohio
Default

How many bulbs will I need to replace my reverse and license lamps on a 2011? I'm guessing I need 4 reverse lights (2 per side) and 2 license lamps.
Old Sep 4, 2010 | 04:49 AM
  #13  
STANGmole's Avatar
STANGmole
2nd Gear Member
 
Joined: May 2010
Posts: 312
From: OR
Default

Originally Posted by KutenStang
How many bulbs will I need to replace my reverse and license lamps on a 2011? I'm guessing I need 4 reverse lights (2 per side) and 2 license lamps.
You are correct sir!!
Old Sep 4, 2010 | 11:17 AM
  #14  
2011CS/GT's Avatar
2011CS/GT
2nd Gear Member
 
Joined: Jun 2010
Posts: 267
From: Texas
Default

Thanks guys.
Old Sep 4, 2010 | 11:46 AM
  #15  
KutenStang's Avatar
KutenStang
1st Gear Member
 
Joined: Aug 2010
Posts: 69
From: Ohio
Default

Ordered the reverse lights for mine. Decided I didn't care about the license plate lights right now - when they burn out I'll replace them. Got the reverse lights in Natural White. I'm sure they will be brighter than the incandescent bulbs in there now if they are anything like the LEDs I put on my Harley.
Old Sep 4, 2010 | 11:49 AM
  #16  
Red ll iine GT's Avatar
Red ll iine GT
2nd Gear Member
 
Joined: May 2009
Posts: 203
From: West Virginia
Default

I know this is the wrong section for me..but will these same ones work for an 05-09 S197?
Old Sep 5, 2010 | 05:31 AM
  #17  
STANGmole's Avatar
STANGmole
2nd Gear Member
 
Joined: May 2010
Posts: 312
From: OR
Default

Originally Posted by Red ll iine GT
I know this is the wrong section for me..but will these same ones work for an 05-09 S197?
The backup lamps are the same...
good news: you only need two
bad news: you need to add a load resistor on the 05-09s to get them to work properly.

The license lights are different.
Old Sep 5, 2010 | 10:06 AM
  #18  
iceguyb14's Avatar
iceguyb14
Thread Starter
3rd Gear Member
 
Joined: Apr 2010
Posts: 844
From: VA
Default

gotta say i added my license plate bulbs and it definitely looks better too.
Old Sep 5, 2010 | 10:30 AM
  #19  
MustangBradQ's Avatar
MustangBradQ
1st Gear Member
 
Joined: Jul 2010
Posts: 60
From: Texas
Default

do you have any pictures of the license plate lamps?
Old Sep 5, 2010 | 10:38 AM
  #20  
iceguyb14's Avatar
iceguyb14
Thread Starter
3rd Gear Member
 
Joined: Apr 2010
Posts: 844
From: VA
Default

not yet, ill take some tonight



All times are GMT -5. The time now is 08:50 AM.