My white 2011 GT with 20" Forgestars! I'm thrilled
Thread Starter
1st Gear Member
Joined: Aug 2011
Posts: 90
From: Georgia
It does ride much quieter to my surprise. Handles better with that wider tired on the back too, but I could still use another .5-1 inch drop, but don't want to risk any negative camber even though I already have the camber kit installed. Anyway, thanks for all the messages guys. Boss 302 splitter and light tinting begins tomorrow. Might get a new rear valence too.
1st Gear Member
Joined: Jan 2012
Posts: 63
From: Idaho
Looks great man, im also digging the black spoiler, goes good with the white. I also went with the Eibach pro-kit springs and I kinda wish it was about .5" lower as well but it looks 100 times better than the stock ride height IMO.
Thread Starter
1st Gear Member
Joined: Aug 2011
Posts: 90
From: Georgia
Thanks for the great comments again guys. Does anyone have any experience with the hurst short-throw shifter from American Muscle? I think that will be my next minor upgrade. They say you get 37% less throw by using this.
Joined: Nov 2010
Posts: 38
From: nevada
Sorry about the pics guys. They are in low light under my parking garage. The only other thing I'll be adding is the Boss 302 splitter under the front valence and smoking tail lights/side markers and that will complete my ride for a while. I may drop it a bit more in the future. Thanks for looking! I'll try to get some better pictures on here when everything is complete with better light. 
Note: Tires are Toyo Proxes 4 with 295/30 on rear and 255/35 on front. Enjoy!
Note: Tires are Toyo Proxes 4 with 295/30 on rear and 255/35 on front. Enjoy!
Here's mind with Steeda Ultralites.
