351 Mustang

408 stroker HP specs

Thread Tools
 
Search this Thread
 
Old 08-24-2007, 12:19 AM
  #1  
fishermanjesse
2nd Gear Member
Thread Starter
 
fishermanjesse's Avatar
 
Join Date: May 2007
Location:
Posts: 422
Default 408 stroker HP specs

wondering what a 408 stroker with about 9.5.1 comp running a good set of heads and a good cam fuel injected and tuned will have estimated HP and TQ
fishermanjesse is offline  
Old 08-24-2007, 12:23 AM
  #2  
ahittz24
3rd Gear Member
 
ahittz24's Avatar
 
Join Date: Dec 2006
Location: South Carolina
Posts: 776
Default RE: 408 stroker HP specs

250hp-550hp Its all dependent on the heads, cam, and setup that you run.
ahittz24 is offline  
Old 08-24-2007, 12:25 AM
  #3  
fishermanjesse
2nd Gear Member
Thread Starter
 
fishermanjesse's Avatar
 
Join Date: May 2007
Location:
Posts: 422
Default RE: 408 stroker HP specs

think 600RWHp is achieveable with NOS
fishermanjesse is offline  
Old 08-24-2007, 02:39 AM
  #4  
MadMan@TheWheel
4th Gear Member
 
MadMan@TheWheel's Avatar
 
Join Date: Jul 2006
Location: The Great State Of Texas
Posts: 1,062
Default RE: 408 stroker HP specs

This really should be posted in the 351 section.
MadMan@TheWheel is offline  
Old 08-24-2007, 06:14 PM
  #5  
92hatchLX
6th Gear Member
 
92hatchLX's Avatar
 
Join Date: Feb 2005
Location:
Posts: 8,439
Default RE: 408 stroker HP specs

ORIGINAL: fishermanjesse

think 600RWHp is achieveable with NOS
2000 rwhp is achieveable with nitrous oxide, it just depends on your set up.
92hatchLX is offline  
Old 08-25-2007, 12:14 PM
  #6  
USMCrebel
Mach I Section Moderator
 
USMCrebel's Avatar
 
Join Date: Mar 2007
Location: round abouts these parts
Posts: 7,140
Default RE: 408 stroker HP specs

I am not still learning motors and all so my word isnt set in stone or anything, but i would guess right at 450-500rwhp and about that in torque.
USMCrebel is offline  
Old 08-25-2007, 12:24 PM
  #7  
WhiteWindsor
5th Gear Member
 
WhiteWindsor's Avatar
 
Join Date: May 2007
Location: Warner Robins,GA
Posts: 2,872
Default RE: 408 stroker HP specs

There is not a correct answer to your question. What heads? What cam? What Intake? That is a very broad question. Tell us what you got, or is this just a hypothetical question?
WhiteWindsor is offline  
Old 08-25-2007, 12:47 PM
  #8  
w8less
6th Gear Member
 
w8less's Avatar
 
Join Date: Feb 2005
Location: KY
Posts: 13,396
Default RE: 408 stroker HP specs

if staying n/a why such a low compression?
w8less is offline  
Old 08-25-2007, 12:54 PM
  #9  
WhiteWindsor
5th Gear Member
 
WhiteWindsor's Avatar
 
Join Date: May 2007
Location: Warner Robins,GA
Posts: 2,872
Default RE: 408 stroker HP specs

ORIGINAL: Jasperstang308

if staying n/a why such a low compression?
I was wondering the same thing. But i am not sure this engine exist yet. I have a little over 11:1 on my 357, boost is def. out of the question, but i can still spray if i retard my timing.
WhiteWindsor is offline  
Old 08-29-2007, 09:14 PM
  #10  
fishermanjesse
2nd Gear Member
Thread Starter
 
fishermanjesse's Avatar
 
Join Date: May 2007
Location:
Posts: 422
Default RE: 408 stroker HP specs

this engine doesnt exist yet i was wanting input for what i should buy about what comp. should i run? heads are stock ported and polished, trick flow stage two cam, intake is profess product typhoon with a 70mm edelbrock throotle body
fishermanjesse is offline  


Quick Reply: 408 stroker HP specs



All times are GMT -5. The time now is 09:28 AM.