Nude girl holding camshaft inside
#11
i dont wanna spend alot now as im building a spare block to be a 408 stroker which i have actually accuired too many blocks and need to sell one but i dunno about price wise im not afraid to buy used if i can get a better deal
#12
Get the new dohc cam kit from summit they just came out its supposed to add a good amount of horsepower i got a link here
http://outdoors.webshots.com/photo/1...57107646UrgMpq
your welcome
http://outdoors.webshots.com/photo/1...57107646UrgMpq
your welcome
#15
http://www.summitracing.com/parts/SUM-K4400/
Is this budget friendly enough? Still need springs, locks, retainers, and pushrods.
How will it work? Don't know. Cheap is cheap, Play the Budget card and that is what you are going to get. Compare it to a stock 351W cam.
With what you are trying to do and what parts you have to work with. I suggested the cheapest thing i could find. I know that this is far from the best you could run.
It is what it is, LOW DOLLAR.
Joe
Is this budget friendly enough? Still need springs, locks, retainers, and pushrods.
How will it work? Don't know. Cheap is cheap, Play the Budget card and that is what you are going to get. Compare it to a stock 351W cam.
With what you are trying to do and what parts you have to work with. I suggested the cheapest thing i could find. I know that this is far from the best you could run.
It is what it is, LOW DOLLAR.
Joe
Thread
Thread Starter
Forum
Replies
Last Post
uberstang1
Classic Mustangs (Tech)
6
09-20-2015 06:42 PM