nissan owner

So I searched and I have seen that Kooks is pretty much one of the only ones that has headers that would work with that combo (listed in title). I called Mac Headers and they said that their headers wouldn't work. I was just curious if anyone has seen any headers less expensive than the Kooks that would work with that combo. Also this will be an automatic (C4.) Thanks.

wildcobrar

Hooker super comps and hedman husslers through summit as well.

Joe

cccharleston

I have the Mac 1.75 with vic jr.s and c4. Real tight on the passenger side.

nissan owner

Really you think you can shoot me some pics? The Mac rep. stated that if I get them there would be a restocking fee if they don't work...So I would really appreciate any help.

cccharleston

I'll try to get some pics. It's kind of hard to get a good pic of the tight area. The headers touched the passenger floorboard right where it bends up to be the firewall. I gave it a little tap and no problems.

broken down mustang

i have hooker super comps on my 85 gt with vic jr heads, i have done a few small mods to makem fit and flow better but they do work

nissan owner

For you guys that have the Vic Jr's heads what size pushrods did you use? Did the stock ones work?

broken down mustang

heck no, mi new comp cams hardened push rods were way longer, it depends on kind of lifter it's best to use a adj push rod to get proper length

nissan owner

By any chance do you have any part numbers for the pushrods?

cccharleston

You should use a "checker" pushrod and then order the correct length.