4.10 Q
Thread Starter
2nd Gear Member
Joined: Jul 2007
Posts: 391
From: Phoenix, AZ
4.10 Q
What rear end does the stock v6 have?
And can I put 4.10s in it or maybe some 3.73s?
What about a slip differential with the new/or stock rear end?
I am going to put an xcharger in my pony over this summer and need the power to get to the wheels as efficiently as possible. Any info is appreciated (Where to buy, how to install, even basics).
And can I put 4.10s in it or maybe some 3.73s?
What about a slip differential with the new/or stock rear end?
I am going to put an xcharger in my pony over this summer and need the power to get to the wheels as efficiently as possible. Any info is appreciated (Where to buy, how to install, even basics).
6th Gear Member
Joined: Dec 2004
Posts: 15,865
From: Ludlow, Mass
RE: 8.8 with 4.10s Q
7.5" 3.31 open diff
for the same price as an 8.8 you can put 4.10s in your car (7.5 rear) with a detroit true trac, ta girdle, and panhard bar relocation kit and it will be alot stronger then a stock 8.8
for the same price as an 8.8 you can put 4.10s in your car (7.5 rear) with a detroit true trac, ta girdle, and panhard bar relocation kit and it will be alot stronger then a stock 8.8
2nd Gear Member
Joined: Jun 2006
Posts: 172
From:
RE: 8.8 with 4.10s Q
Let me add,the lpw girdle for the 7.5 does'nt need a new panhard bar.Fits fine.
example:http://www.lpwracing.com/featured.asp
example:http://www.lpwracing.com/featured.asp
Thread
Thread Starter
Forum
Replies
Last Post
junior04
4.6L (1996-2004 Modular) Mustang
1
Sep 28, 2015 10:53 AM
Figure8allday
4.6L (1996-2004 Modular) Mustang
6
Aug 22, 2015 11:11 AM