Group Buy Aluminum Thermostat Housing! All interested reply to this thread - MustangForums.com



4.0L V6 Technical Discussions Any questions about engine, transmission, exhaust, tuners/CAI, or gearing can be asked here!

Reply
 
 
 
Thread Tools Search this Thread
Old 11-03-2013, 07:27 PM   #1  
IvanRad
2nd Gear Member
Thread Starter
 
Join Date: Aug 2010
Location: California
Posts: 399
Default Group Buy Aluminum Thermostat Housing! All interested reply to this thread

I am going to be performing a huge tune up on my 4.0 changing out various parts since i just hit the 50k mark.
If anyone is interested in a group buy for this thermostat housing please reply to the thread.

My goal is to get 20+ members to receive the thermostat housing for $80 Each I think that's reasonable with such a big buy!

http://www.ebay.com/itm/05-10-mustan...69c622&vxp=mtr

About:
Now Available ,metal thermostat housing upper and lower for v6 4.0 Mustang. Works on all 2005-2010 mustangs with the 4.0 engine including the convertible. Comes with a new oring for the thermostat, lower housing (special seal) for connection to the head and a new oring for the temperature sensor. This is made in America and not in China. Finally an alternative to the plastic pieces that fail all the time. Only replace the parts once and your done. This is a cast aluminum engineered part made in America.

GOAL: 30+ Units
$135.00 Per Unit


18/30 Goal

*List
IvanRad
Nuke
[email protected]
ctross
MEK
drakefamily2
Stangbass
conor1148
stoneblue
kzonts
VistaBlue09
parmola x2
MirageII
roospike
Stangrunner06
Sarge1400
DenIs2Fast4U


Last edited by IvanRad; 12-08-2013 at 11:54 AM.
IvanRad is offline   Reply With Quote
Old 11-03-2013, 08:19 PM   #2  
Nuke
6th Gear Member
 
Nuke's Avatar
 
Join Date: Jun 2007
Location: PA to KY ('07) to IL ('09) to MS ('10) to FL ('11)
Posts: 16,186
Default

I'd probably be interested for my wife's '06. We haven't had a problem yet with only about 45k miles but it's likely just a matter of time.

Subscribed.
Nuke is offline   Reply With Quote
Old 11-03-2013, 08:55 PM   #3  
[email protected]
2nd Gear Member
 
flyhigh@mach1's Avatar
 
Join Date: Apr 2012
Location: FL
Posts: 184
Default

I'll buy at $80.
flyhigh@mach1 is offline   Reply With Quote
Old 11-03-2013, 11:50 PM   #4  
IvanRad
2nd Gear Member
Thread Starter
 
Join Date: Aug 2010
Location: California
Posts: 399
Default

added 2 to the list plenty to go
IvanRad is offline   Reply With Quote
Old 11-04-2013, 12:12 AM   #5  
ctross
 
ctross's Avatar
 
Join Date: Jun 2013
Location: AZ
Posts: 32
Default

Was going to buy this in a couple days anyways, so I'm in.
ctross is offline   Reply With Quote
Old 11-04-2013, 05:26 AM   #6  
MEK
1st Gear Member
 
Join Date: Aug 2007
Location: WI
Posts: 146
Default

Add me to the list also.
MEK is offline   Reply With Quote
Old 11-04-2013, 09:58 AM   #7  
IvanRad
2nd Gear Member
Thread Starter
 
Join Date: Aug 2010
Location: California
Posts: 399
Default

Talked with the distributor and so far I've gotten a Wholesale price but will keep trying to grow this list out , to get a better price .
It went from $179 now $142.
Let's keep this going I'm heading over to stangnet to get more attention.
Everyone's going to want to hop on this .
IvanRad is offline   Reply With Quote
Old 11-04-2013, 10:02 AM   #8  
kevinmalec
5th Gear Member
 
kevinmalec's Avatar
 
Join Date: Apr 2008
Location: Acworth, GA
Posts: 3,666
Default

Wish this was 6 months sooner....I already purchased and replaced out my old thermostat housing with another plastic one. :/
I am still dealing with coolant leak issue, however it is not coming from the thermostat housing and am not able to find out where it is coming from!
Coolant is leaking and setting in the "V" section on the engine where the knock sensor is located.
kevinmalec is offline   Reply With Quote
Old 11-04-2013, 12:41 PM   #9  
IvanRad
2nd Gear Member
Thread Starter
 
Join Date: Aug 2010
Location: California
Posts: 399
Default

Kevin take pictures maybe we can help pin point it with a video . I will be documenting my install.
UPDATE:
Got another $5 off the units so now we are at $135. much better than $179.00

Last edited by IvanRad; 11-04-2013 at 12:44 PM.
IvanRad is offline   Reply With Quote
Old 11-04-2013, 01:09 PM   #10  
kevinmalec
5th Gear Member
 
kevinmalec's Avatar
 
Join Date: Apr 2008
Location: Acworth, GA
Posts: 3,666
Default

Quote:
Originally Posted by IvanRad View Post
Kevin take pictures maybe we can help pin point it with a video . I will be documenting my install.
UPDATE:
Got another $5 off the units so now we are at $135. much better than $179.00
I wish I could. It's really hard to see the coolant due to being down in the "V" of the engine, even with a flashlight and by eye. The coolant is setting directly behind the thermostat where the knock sensor is located.
kevinmalec is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Wheel Question! (New member, hi folks) Tivo304 New Member Area 5 05-30-2018 04:58 PM
Legendary Hurst shifters - up to $50 rebate carid General Tech 1 07-08-2016 09:55 AM
"Death Trap" my new 84 GT build thread 67LimeCoupe 5.0L General Discussion 45 11-25-2015 08:55 PM
AODE Woes Pyrate Dave 5.0L (1979-1995) Mustang 8 09-10-2015 07:30 PM
2007 mustang 4.0 PLEASE HELP Wesley1995 4.0L V6 Technical Discussions 8 08-30-2015 02:01 PM


Tags
aluminium, coolant, housing, thermostat

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Advertising
Featured Sponsors
Vendor Directory

All times are GMT -5. The time now is 02:42 PM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.