04 mach 1 24# injectors work on 99 ish 4.6 SOHC?
#2
RE: 04 mach 1 24# injectors work on 99 ish 4.6 SOHC?
ORIGINAL: romans marine
if they physically fit will I need to get wiring adaptors?
if they physically fit will I need to get wiring adaptors?
they should work perfectly? are they top feed injectors?
#7
RE: 04 mach 1 24# injectors work on 99 ish 4.6 SOHC?
ORIGINAL: code3GT
Why are you putting a new MAF on and what are your other mods?
ORIGINAL: romans marine
because I'm putting a new MAF on.
because I'm putting a new MAF on.
People buy new MAF's becasue websites say they give you horsepower... In retrospec you dont need it because its useless unless your going FI This is why websites should tell people that MAF is for FI or Super modified N/A
#8
RE: 04 mach 1 24# injectors work on 99 ish 4.6 SOHC?
BBK Shorty Headers
Off Road X-Pipe
Borla Cat Back
Underdrive Pullys
DiabloSport Tuner
BBK Upper intake Plenum W/75MM BBK TB
80MM Billet MAF,
C&L Trueflow CAI
4.10 gears
Stage 1 Clutch
B&M Shorty Shifter
Cobra Steel forged Crank
Forged H beams
Forged Pistons (flattop) .020 over.
Block is back from the machine shop with the new rotating gear in. Just need to put it all together once the UPS guy brings me the rest of my stuff.
Off Road X-Pipe
Borla Cat Back
Underdrive Pullys
DiabloSport Tuner
BBK Upper intake Plenum W/75MM BBK TB
80MM Billet MAF,
C&L Trueflow CAI
4.10 gears
Stage 1 Clutch
B&M Shorty Shifter
Cobra Steel forged Crank
Forged H beams
Forged Pistons (flattop) .020 over.
Block is back from the machine shop with the new rotating gear in. Just need to put it all together once the UPS guy brings me the rest of my stuff.
#9
RE: 04 mach 1 24# injectors work on 99 ish 4.6 SOHC?
ORIGINAL: romans marine
BBK Shorty Headers
Off Road X-Pipe
Borla Cat Back
Underdrive Pullys
DiabloSport Tuner
BBK Upper intake Plenum W/75MM BBK TB
80MM Billet MAF,
C&L Trueflow CAI
4.10 gears
Stage 1 Clutch
B&M Shorty Shifter
Cobra Steel forged Crank
Forged H beams
Forged Pistons (flattop) .020 over.
Block is back from the machine shop with the new rotating gear in. Just need to put it all together once the UPS guy brings me the rest of my stuff.
BBK Shorty Headers
Off Road X-Pipe
Borla Cat Back
Underdrive Pullys
DiabloSport Tuner
BBK Upper intake Plenum W/75MM BBK TB
80MM Billet MAF,
C&L Trueflow CAI
4.10 gears
Stage 1 Clutch
B&M Shorty Shifter
Cobra Steel forged Crank
Forged H beams
Forged Pistons (flattop) .020 over.
Block is back from the machine shop with the new rotating gear in. Just need to put it all together once the UPS guy brings me the rest of my stuff.
Sell the MAF and put the stock one back on with the 24#'s. But hey, what do I know?