4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

finally broke into the 12's

Thread Tools
 
Search this Thread
 
Old 03-15-2006, 04:44 PM
  #11  
GTnAZ
2nd Gear Member
 
GTnAZ's Avatar
 
Join Date: Sep 2005
Location:
Posts: 469
Default RE: finally broke into the 12's

WOW 125shot on a stock motor?
That pushing it.. i hope you have money to fix it!
GTnAZ is offline  
Old 03-15-2006, 04:58 PM
  #12  
rbstang
6th Gear Member
 
rbstang's Avatar
 
Join Date: Apr 2005
Location: Wilmington, NC
Posts: 5,608
Default RE: finally broke into the 12's

ORIGINAL: GTnAZ

WOW 125shot on a stock motor?
That pushing it.. i hope you have money to fix it!
not even close.. 150+ is pushing it.
rbstang is offline  
Old 03-15-2006, 05:14 PM
  #13  
Fryguy22
4th Gear Member
 
Fryguy22's Avatar
 
Join Date: Aug 2005
Location:
Posts: 1,817
Default RE: finally broke into the 12's

100 shot is safe
Fryguy22 is offline  
Old 03-15-2006, 05:25 PM
  #14  
code3GT
Mustang Nazi
 
code3GT's Avatar
 
Join Date: Sep 2004
Location: Texas, baby
Posts: 13,444
Default RE: finally broke into the 12's

125 wet shot???? God be with you my son...
code3GT is offline  
Old 03-15-2006, 06:32 PM
  #15  
stangerism96
1st Gear Member
 
stangerism96's Avatar
 
Join Date: Feb 2006
Location:
Posts: 53
Default RE: finally broke into the 12's

125 shot is relatively safe as long as your not getting any detonation. I have been running that for about two years with know problems just make sure its tuned right. 125 shot is pretty safe on about any v8.
stangerism96 is offline  
Old 03-15-2006, 08:22 PM
  #16  
xkon
2nd Gear Member
Thread Starter
 
xkon's Avatar
 
Join Date: Sep 2005
Location: NJ
Posts: 294
Default RE: finally broke into the 12's

ORIGINAL: stangerism96

125 shot is relatively safe as long as your not getting any detonation. I have been running that for about two years with know problems just make sure its tuned right. 125 shot is pretty safe on about any v8.
thats what i heard...i retarded the timing by 2 degrees, and i sprayed it 10+ times so far and everything seems to be acting right
xkon is offline  
Old 03-15-2006, 08:43 PM
  #17  
BCisme
5th Gear Member
 
BCisme's Avatar
 
Join Date: May 2003
Location: Norfolk, VA
Posts: 2,129
Default RE: finally broke into the 12's

trap speeds? 60 foots?
BCisme is offline  
Old 03-15-2006, 09:00 PM
  #18  
xkon
2nd Gear Member
Thread Starter
 
xkon's Avatar
 
Join Date: Sep 2005
Location: NJ
Posts: 294
Default RE: finally broke into the 12's

ORIGINAL: BCisme

trap speeds? 60 foots?
these were my best 2 runs

r/t = -.020 (doh)
60 ft = 2.047
330 = 5.542
1/8 = 8.385
1/8 mph = 86.09
1000 = 10.851
1/4 = 12.943
1/4 mph = 107.63

r/t = .206
60 ft = 2.123
330 = 5.578
1/8 = 8.411
1/8 mph = 86.53
1000 = 10.881
1/4 = 12.998
1/4 mph = 106.17
xkon is offline  
Old 03-15-2006, 10:06 PM
  #19  
BCisme
5th Gear Member
 
BCisme's Avatar
 
Join Date: May 2003
Location: Norfolk, VA
Posts: 2,129
Default RE: finally broke into the 12's

good numbers. a poor 60 ft, on 315 drag radials you should be getting 1.8's, but your numbers show decent driving down the track. keep improving!! can you get me an 11.9 on the stock motor with juice?
BCisme is offline  
Old 03-15-2006, 10:58 PM
  #20  
mingrey01gt
2nd Gear Member
 
mingrey01gt's Avatar
 
Join Date: Feb 2006
Location:
Posts: 181
Default RE: finally broke into the 12's

congrats
mingrey01gt is offline  


Quick Reply: finally broke into the 12's



All times are GMT -5. The time now is 03:42 PM.