how much does a shift kit install cost?
2nd Gear Member
Joined: Apr 2006
Posts: 408
From:
RE: how much does a shift kit install cost?
I ordered a shifter yesterday and plan to do it myself for the first time. I've been told it's not too difficult. I have asked a couple of shops how much they would charge though before I decided to do it myself and I was told anywhere from $30-40.
4th Gear Member
Joined: Oct 2005
Posts: 1,555
From:
RE: how much does a shift kit install cost?
you could do it yourself too if you really wanted too. i think its just a matter of taking the pan then the valve body off. then switching around the ***** and putting on a new gasket. i think the transgo makes a do it yourself one that comes with a video
4th Gear Member
Joined: Nov 2004
Posts: 1,657
From: California
RE: how much does a shift kit install cost?
www.transgo.com
If you are going to do the installation yourself pay attention to detail, especially during the steps of replacing or adding the ball bearings and drilling can be a little tricky. PAY ATTENTION.
Now if you are going to take it to a repudiable tranny shop, you are going to pay from 200-350.00 dollars be prepared.
I have one and sure does make a difference, especially if you have gears. Good luck and keep us posted.
If you are going to do the installation yourself pay attention to detail, especially during the steps of replacing or adding the ball bearings and drilling can be a little tricky. PAY ATTENTION.
Now if you are going to take it to a repudiable tranny shop, you are going to pay from 200-350.00 dollars be prepared.
I have one and sure does make a difference, especially if you have gears. Good luck and keep us posted.
4th Gear Member
Joined: Oct 2005
Posts: 1,555
From:
RE: how much does a shift kit install cost?
ORIGINAL: badtzmaru
www.transgo.com
If you are going to do the installation yourself pay attention to detail, especially during the steps of replacing or adding the ball bearings and drilling can be a little tricky. PAY ATTENTION.
Now if you are going to take it to a repudiable tranny shop, you are going to pay from 200-350.00 dollars be prepared.
I have one and sure does make a difference, especially if you have gears. Good luck and keep us posted.
www.transgo.com
If you are going to do the installation yourself pay attention to detail, especially during the steps of replacing or adding the ball bearings and drilling can be a little tricky. PAY ATTENTION.
Now if you are going to take it to a repudiable tranny shop, you are going to pay from 200-350.00 dollars be prepared.
I have one and sure does make a difference, especially if you have gears. Good luck and keep us posted.
Thread
Thread Starter
Forum
Replies
Last Post
Soldier GT
4.6L General Discussion
10
Sep 8, 2015 01:28 AM
