4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

4.6 overheated???

Thread Tools
 
Search this Thread
 
Old Jul 23, 2006 | 11:25 AM
  #1  
stangy004's Avatar
stangy004
Thread Starter
2nd Gear Member
 
Joined: Jul 2006
Posts: 182
From:
Default 4.6 overheated???

i overheated my car , thing is knockin sounds like its coming from the crank ,has this happened to any body in a 4.6 or think u know what the knock is i really dont feel like pulling the motor
Old Jul 23, 2006 | 11:48 AM
  #2  
yuengling910's Avatar
yuengling910
1st Gear Member
 
Joined: Apr 2006
Posts: 139
From: VA
Default RE: 4.6 overheated???

knocking sound is probably detonation, caused by the overheating. how did you overheat it, were you just driving around or racing? im guessing you already run 93 octane with a supercharger. this could be a serious problem if it continues, but it could have been temporary due to the overheated condition. hopefully no real damage occured.
Old Jul 23, 2006 | 11:51 AM
  #3  
so1o2k3's Avatar
so1o2k3
4th Gear Member
 
Joined: Mar 2006
Posts: 1,882
From:
Default RE: 4.6 overheated???

Hmmm, overheating wouldn't really cause something in the crank to come apart. If the something in the rotating assembly is indeed the problem, it probably happened while you were running the engine hard and then it overheated. I had a friend who spun a bearing while trying to go fast.
Old Jul 23, 2006 | 11:58 AM
  #4  
stangy004's Avatar
stangy004
Thread Starter
2nd Gear Member
 
Joined: Jul 2006
Posts: 182
From:
Default RE: 4.6 overheated???

well i was doin a burnout for like 5 mins at 6500 rpm once i got done and pulled over to change the popped tire there was coolant all over my motor i checked the guage it was pegged but it want knockin yet. so 1 hour later i went to leave and get on the highway the guage started getting higher and then it started to knock and the knock just kept gettinglouder *** the guage went up
Old Jul 23, 2006 | 12:06 PM
  #5  
so1o2k3's Avatar
so1o2k3
4th Gear Member
 
Joined: Mar 2006
Posts: 1,882
From:
Default RE: 4.6 overheated???

Wait, let me get this straight...you did a 5 minute constant burnout at 6500rpm? Dude the redline is at 5700, you probably damaged the internals being that you were probably bouncing off the revlimiter.
Old Jul 23, 2006 | 12:13 PM
  #6  
stangy004's Avatar
stangy004
Thread Starter
2nd Gear Member
 
Joined: Jul 2006
Posts: 182
From:
Default RE: 4.6 overheated???

i have my rev limiter set at 7 000 with a stock block thing has held up pretty good but it didnt start knockin right after the burnout it happened about a hour later on the highway when it over heated and just started knockin
Old Jul 23, 2006 | 12:15 PM
  #7  
stangy004's Avatar
stangy004
Thread Starter
2nd Gear Member
 
Joined: Jul 2006
Posts: 182
From:
Default RE: 4.6 overheated???

if u want to see the burnout on video before it started knockin u can check i to out on my myspace at www.myspace.com/seth321
Old Jul 23, 2006 | 12:22 PM
  #8  
so1o2k3's Avatar
so1o2k3
4th Gear Member
 
Joined: Mar 2006
Posts: 1,882
From:
Default RE: 4.6 overheated???

your profile is set to private, just upload it on streetfire.
Old Jul 23, 2006 | 12:51 PM
  #9  
David_K's Avatar
David_K
5th Gear Member
 
Joined: Mar 2005
Posts: 3,967
From:
Default RE: 4.6 overheated???

get an autometer water temp gauge you cant trust the stock gauge
Old Jul 23, 2006 | 12:53 PM
  #10  
stangy004's Avatar
stangy004
Thread Starter
2nd Gear Member
 
Joined: Jul 2006
Posts: 182
From:
Default RE: 4.6 overheated???

http://vids.myspace.com/index.cfm?fu...=886820096&n=2



All times are GMT -5. The time now is 11:28 PM.