almost done
06-14-2004, 02:57 AM
#1
2nd Gear Member
Thread Starter
Join Date: Feb 2004
Location:
Posts: 335
almost done
The pi swap is pretty much complete and running RElIABLY(spelling?). But it dosent feel up to par. (not as good as the first time.) The reason might be because of two new codes im getting.
1443: Low or No Pruge condition.
1151:Lack Of HO2S-21 Switch Indicates Lean
ANY help at ALL help be appreaciated!!!
1443: Low or No Pruge condition.
1151:Lack Of HO2S-21 Switch Indicates Lean
ANY help at ALL help be appreaciated!!!
06-14-2004, 10:00 AM
#2
3rd Gear Member
Join Date: Dec 2003
Location: 12.59@107mph
Posts: 592
RE: almost done
the 1443 has something to do with the vaccum or pressure being released from the gas tank/lines etc... something isn't on the whole way and is releasing the fumes into the enviroment.
still looking for the other one.
still looking for the other one.
06-14-2004, 10:21 AM
#3
3rd Gear Member
Join Date: Dec 2003
Location: 12.59@107mph
Posts: 592
RE: almost done
this is what i found on the 1151..something with the o2 sensors on the driver side.
http://www.ford-trucks.com/forums/ar...x.php/t-108440
http://www.ford-trucks.com/forums/ar...x.php/t-108440