Which cams??
#1
Which cams??
I have pretty much made up my mind to go with the Steen Racing PI stage II package. The kit comes with stage II ported heads, springs, PI intake, necessary hardware. The only thing i can think of that i will need is a set of cams. Here are the specs on the heads:
http://www.steenracing.com/portandpolish.htm#stage2 . I'm looking for some of you guys to recommend a set of cams that will benefit me the most, but where i wont have any clearance issues. Thanks!
http://www.steenracing.com/portandpolish.htm#stage2 . I'm looking for some of you guys to recommend a set of cams that will benefit me the most, but where i wont have any clearance issues. Thanks!
#2
RE: Which cams??
#6
RE: Which cams??
Another thing, on vt's website...for the stage II cams it states that for autos they recommend atleast a 2800 stall in autos and atleast 3.73 gears. I have 4.10's, but no stall...do you think this is a big deal or must i absolutely need the stall before putting in the cams??
#7
RE: Which cams??
238 248 0.41 0.398
252 282 0.41 0.398
262 282 0.41 0.398
275 293 0.41 0.398
275 293 0.485 0.485
L/S
205 205 0.46 0.475 109
213 219 0.43 0.495 112
224 224 0.46 0.475 109
233 237 0.46 0.49 109
209 209 0.452 0.452
235 234 0.474 0.452
209 225 0.452 0.452
235 235 0.474 0.474
225 235 0.452 0.474
230 230 0.385 0.385
L/S
218 218 0.425 0.425 116
226 222 0.425 0.425 114
234 230 0.425 0.425 114
226 224 0.475 0.45 114
234 232 0.475 0.45 114
242 240 0.475 0.45 114
222 224 0.475 0.45 116
230 232 0.475 0.45 116
238 240 0.475 0.45 116
L/S
192 198 0.421 0.427 114
192 204 0.421 0.43 114
210 216 0.472 0.473 114
222 222 0.475 0.475 114
228 232 0.484 0.484 114
228 232 0.484 0.484 114
236 244 0.486 0.486 114
at.050 at .200 lobe lift Gross Custom
176 69 0.234 0.421 114
182 76 0.237 0.427 114
188 81 0.239 0.43 114
194 96 0.262 0.472 114
200 100 0.263 0.473 114
206 103 0.264 0.475 114
212 109 0.269 0.484 114
216 111 0.269 0.484 114
220 114 0.27 0.486 114
228 126 0.275 0.495 114
the 1st group is LM, then ModMax, SHM, Comp and finially Crower and custom Crower's
vt does not make cams-FYI
252 282 0.41 0.398
262 282 0.41 0.398
275 293 0.41 0.398
275 293 0.485 0.485
L/S
205 205 0.46 0.475 109
213 219 0.43 0.495 112
224 224 0.46 0.475 109
233 237 0.46 0.49 109
209 209 0.452 0.452
235 234 0.474 0.452
209 225 0.452 0.452
235 235 0.474 0.474
225 235 0.452 0.474
230 230 0.385 0.385
L/S
218 218 0.425 0.425 116
226 222 0.425 0.425 114
234 230 0.425 0.425 114
226 224 0.475 0.45 114
234 232 0.475 0.45 114
242 240 0.475 0.45 114
222 224 0.475 0.45 116
230 232 0.475 0.45 116
238 240 0.475 0.45 116
L/S
192 198 0.421 0.427 114
192 204 0.421 0.43 114
210 216 0.472 0.473 114
222 222 0.475 0.475 114
228 232 0.484 0.484 114
228 232 0.484 0.484 114
236 244 0.486 0.486 114
at.050 at .200 lobe lift Gross Custom
176 69 0.234 0.421 114
182 76 0.237 0.427 114
188 81 0.239 0.43 114
194 96 0.262 0.472 114
200 100 0.263 0.473 114
206 103 0.264 0.475 114
212 109 0.269 0.484 114
216 111 0.269 0.484 114
220 114 0.27 0.486 114
228 126 0.275 0.495 114
the 1st group is LM, then ModMax, SHM, Comp and finially Crower and custom Crower's
vt does not make cams-FYI