First mods for an 03 Mach1
Thread Starter
4th Gear Member
Joined: Feb 2006
Posts: 1,110
From:
First mods for an 03 Mach1
Just got an 03Mach1, upgraded from a 94 mustang GT
What are the typical 1st mods that I should do?
I'm thinking Shortshifter/SLP Exhaust/Intake
Anything else I should do?
What are the typical 1st mods that I should do?
I'm thinking Shortshifter/SLP Exhaust/Intake
Anything else I should do?
2nd Gear Member
Joined: Jul 2006
Posts: 322
From: Havelock, NC
RE: First mods for an 03 Mach1
i think for someone that is looking for performance only.
1. shifter
2. exhaust
3. gears
i wanted looks first. so i got springs, rims, tints, headlights, and foglamps first
then wen with shifter, and exhaust.
1. shifter
2. exhaust
3. gears
i wanted looks first. so i got springs, rims, tints, headlights, and foglamps first
then wen with shifter, and exhaust.
4th Gear Member
Joined: Jun 2006
Posts: 1,777
From: macomb
RE: First mods for an 03 Mach1
long tube headers ftw, plenum tb, and i would go with 4.30 gears not 4.10s, 4.10s on a 2v and 4.30s on a 4 valve. you have the bigger rpm range with the 4v than 2 valve thats why i say 4.30s and look at this http://www.alternativeauto.com/misc/...ct_dec-05.html these guys know there s*it
5th Gear Member
Joined: Oct 2005
Posts: 2,751
From: Berkley, Michigan
RE: First mods for an 03 Mach1
ORIGINAL: 5speedstang
long tube headers ftw, plenum tb, and i would go with 4.30 gears not 4.10s, 4.10s on a 2v and 4.30s on a 4 valve. you have the bigger rpm range with the 4v than 2 valve thats why i say 4.30s and look at this http://www.alternativeauto.com/misc/...ct_dec-05.html these guys know there s*it
long tube headers ftw, plenum tb, and i would go with 4.30 gears not 4.10s, 4.10s on a 2v and 4.30s on a 4 valve. you have the bigger rpm range with the 4v than 2 valve thats why i say 4.30s and look at this http://www.alternativeauto.com/misc/...ct_dec-05.html these guys know there s*it
Thread
Thread Starter
Forum
Replies
Last Post
