Halo/Angel Eye Headlight Question
#12
RE: Halo/Angel Eye Headlight Question
ORIGINAL: TsmithGT00
Looks pretty nice. Got any more pics?
ORIGINAL: etep31
I got the Halo headlights for christmas andI spliced and soddered the two halo and two led lights (the three in the middle and the one on the inside towards the grill) together in to the parking light cord. I had to peel back the protective wire covering and when I opened it up there were three wires. One was black (negative) one was brown and one was white and green on the right and white and blue on the left. The black wire from the halos and leds connect to the black of the parking light and the white from the leds and halos connects to the brown of the parking light. With this setup and the ford factory alarm setup the halos and leds flash when you lock the car and believe me it looks great. Another thing was the screw with the circular disc and jagged prongs on the end on the back of the assembly is used to tilt the entire light assembly (high and low beams) up or down. I found with mine the wayI got themI could only see 10 feet in front od my car. Thw whole job took about an hour with help from afriend to hold the light while soddering. Aslo the original parking lamp is used in the new assembly.The instructions that come with them are complete crap and are half in chinese so I hopes this helps with your install.
[IMG]local://upfiles/57758/963A537941C44595B0333E7EC7ABE346.jpg[/IMG]
I got the Halo headlights for christmas andI spliced and soddered the two halo and two led lights (the three in the middle and the one on the inside towards the grill) together in to the parking light cord. I had to peel back the protective wire covering and when I opened it up there were three wires. One was black (negative) one was brown and one was white and green on the right and white and blue on the left. The black wire from the halos and leds connect to the black of the parking light and the white from the leds and halos connects to the brown of the parking light. With this setup and the ford factory alarm setup the halos and leds flash when you lock the car and believe me it looks great. Another thing was the screw with the circular disc and jagged prongs on the end on the back of the assembly is used to tilt the entire light assembly (high and low beams) up or down. I found with mine the wayI got themI could only see 10 feet in front od my car. Thw whole job took about an hour with help from afriend to hold the light while soddering. Aslo the original parking lamp is used in the new assembly.The instructions that come with them are complete crap and are half in chinese so I hopes this helps with your install.
[IMG]local://upfiles/57758/963A537941C44595B0333E7EC7ABE346.jpg[/IMG]
ya i'll get some more tonight
#14
RE: Halo/Angel Eye Headlight Question
ORIGINAL: TsmithGT00
Looks pretty nice. Got any more pics?
ORIGINAL: etep31
I got the Halo headlights for christmas andI spliced and soddered the two halo and two led lights (the three in the middle and the one on the inside towards the grill) together in to the parking light cord. I had to peel back the protective wire covering and when I opened it up there were three wires. One was black (negative) one was brown and one was white and green on the right and white and blue on the left. The black wire from the halos and leds connect to the black of the parking light and the white from the leds and halos connects to the brown of the parking light. With this setup and the ford factory alarm setup the halos and leds flash when you lock the car and believe me it looks great. Another thing was the screw with the circular disc and jagged prongs on the end on the back of the assembly is used to tilt the entire light assembly (high and low beams) up or down. I found with mine the wayI got themI could only see 10 feet in front od my car. Thw whole job took about an hour with help from afriend to hold the light while soddering. Aslo the original parking lamp is used in the new assembly.The instructions that come with them are complete crap and are half in chinese so I hopes this helps with your install.
[IMG]local://upfiles/57758/963A537941C44595B0333E7EC7ABE346.jpg[/IMG]
I got the Halo headlights for christmas andI spliced and soddered the two halo and two led lights (the three in the middle and the one on the inside towards the grill) together in to the parking light cord. I had to peel back the protective wire covering and when I opened it up there were three wires. One was black (negative) one was brown and one was white and green on the right and white and blue on the left. The black wire from the halos and leds connect to the black of the parking light and the white from the leds and halos connects to the brown of the parking light. With this setup and the ford factory alarm setup the halos and leds flash when you lock the car and believe me it looks great. Another thing was the screw with the circular disc and jagged prongs on the end on the back of the assembly is used to tilt the entire light assembly (high and low beams) up or down. I found with mine the wayI got themI could only see 10 feet in front od my car. Thw whole job took about an hour with help from afriend to hold the light while soddering. Aslo the original parking lamp is used in the new assembly.The instructions that come with them are complete crap and are half in chinese so I hopes this helps with your install.
[IMG]local://upfiles/57758/963A537941C44595B0333E7EC7ABE346.jpg[/IMG]
High Beams http://i89.photobucket.com/albums/k2...1/IMG_5660.jpg
Low Beams http://i89.photobucket.com/albums/k2...1/IMG_5659.jpg
Side View http://i89.photobucket.com/albums/k2...IMG_5654-1.jpg
Front View http://i89.photobucket.com/albums/k2...1/IMG_5658.jpg
#15
RE: Halo/Angel Eye Headlight Question
ORIGINAL: etep31
here are those other pics
High Beams http://i89.photobucket.com/albums/k2...1/IMG_5660.jpg
Low Beams http://i89.photobucket.com/albums/k2...1/IMG_5659.jpg
Side View http://i89.photobucket.com/albums/k2...IMG_5654-1.jpg
Front View http://i89.photobucket.com/albums/k2...1/IMG_5658.jpg
ORIGINAL: TsmithGT00
Looks pretty nice. Got any more pics?
ORIGINAL: etep31
I got the Halo headlights for christmas andI spliced and soddered the two halo and two led lights (the three in the middle and the one on the inside towards the grill) together in to the parking light cord. I had to peel back the protective wire covering and when I opened it up there were three wires. One was black (negative) one was brown and one was white and green on the right and white and blue on the left. The black wire from the halos and leds connect to the black of the parking light and the white from the leds and halos connects to the brown of the parking light. With this setup and the ford factory alarm setup the halos and leds flash when you lock the car and believe me it looks great. Another thing was the screw with the circular disc and jagged prongs on the end on the back of the assembly is used to tilt the entire light assembly (high and low beams) up or down. I found with mine the wayI got themI could only see 10 feet in front od my car. Thw whole job took about an hour with help from afriend to hold the light while soddering. Aslo the original parking lamp is used in the new assembly.The instructions that come with them are complete crap and are half in chinese so I hopes this helps with your install.
[IMG]local://upfiles/57758/963A537941C44595B0333E7EC7ABE346.jpg[/IMG]
I got the Halo headlights for christmas andI spliced and soddered the two halo and two led lights (the three in the middle and the one on the inside towards the grill) together in to the parking light cord. I had to peel back the protective wire covering and when I opened it up there were three wires. One was black (negative) one was brown and one was white and green on the right and white and blue on the left. The black wire from the halos and leds connect to the black of the parking light and the white from the leds and halos connects to the brown of the parking light. With this setup and the ford factory alarm setup the halos and leds flash when you lock the car and believe me it looks great. Another thing was the screw with the circular disc and jagged prongs on the end on the back of the assembly is used to tilt the entire light assembly (high and low beams) up or down. I found with mine the wayI got themI could only see 10 feet in front od my car. Thw whole job took about an hour with help from afriend to hold the light while soddering. Aslo the original parking lamp is used in the new assembly.The instructions that come with them are complete crap and are half in chinese so I hopes this helps with your install.
[IMG]local://upfiles/57758/963A537941C44595B0333E7EC7ABE346.jpg[/IMG]
High Beams http://i89.photobucket.com/albums/k2...1/IMG_5660.jpg
Low Beams http://i89.photobucket.com/albums/k2...1/IMG_5659.jpg
Side View http://i89.photobucket.com/albums/k2...IMG_5654-1.jpg
Front View http://i89.photobucket.com/albums/k2...1/IMG_5658.jpg
#16
RE: Halo/Angel Eye Headlight Question
ORIGINAL: Zero 16X
Are you using Blue H3's? I tried mine and they came with what looked like yellowish stocks and i changed them out to white and they still have a bit of tint to them. Ive been looking at changing my whole front end to blue
ORIGINAL: etep31
here are those other pics
High Beams http://i89.photobucket.com/albums/k2...1/IMG_5660.jpg
Low Beams http://i89.photobucket.com/albums/k2...1/IMG_5659.jpg
Side View http://i89.photobucket.com/albums/k2...IMG_5654-1.jpg
Front View http://i89.photobucket.com/albums/k2...1/IMG_5658.jpg
ORIGINAL: TsmithGT00
Looks pretty nice. Got any more pics?
ORIGINAL: etep31
I got the Halo headlights for christmas andI spliced and soddered the two halo and two led lights (the three in the middle and the one on the inside towards the grill) together in to the parking light cord. I had to peel back the protective wire covering and when I opened it up there were three wires. One was black (negative) one was brown and one was white and green on the right and white and blue on the left. The black wire from the halos and leds connect to the black of the parking light and the white from the leds and halos connects to the brown of the parking light. With this setup and the ford factory alarm setup the halos and leds flash when you lock the car and believe me it looks great. Another thing was the screw with the circular disc and jagged prongs on the end on the back of the assembly is used to tilt the entire light assembly (high and low beams) up or down. I found with mine the wayI got themI could only see 10 feet in front od my car. Thw whole job took about an hour with help from afriend to hold the light while soddering. Aslo the original parking lamp is used in the new assembly.The instructions that come with them are complete crap and are half in chinese so I hopes this helps with your install.
[IMG]local://upfiles/57758/963A537941C44595B0333E7EC7ABE346.jpg[/IMG]
I got the Halo headlights for christmas andI spliced and soddered the two halo and two led lights (the three in the middle and the one on the inside towards the grill) together in to the parking light cord. I had to peel back the protective wire covering and when I opened it up there were three wires. One was black (negative) one was brown and one was white and green on the right and white and blue on the left. The black wire from the halos and leds connect to the black of the parking light and the white from the leds and halos connects to the brown of the parking light. With this setup and the ford factory alarm setup the halos and leds flash when you lock the car and believe me it looks great. Another thing was the screw with the circular disc and jagged prongs on the end on the back of the assembly is used to tilt the entire light assembly (high and low beams) up or down. I found with mine the wayI got themI could only see 10 feet in front od my car. Thw whole job took about an hour with help from afriend to hold the light while soddering. Aslo the original parking lamp is used in the new assembly.The instructions that come with them are complete crap and are half in chinese so I hopes this helps with your install.
[IMG]local://upfiles/57758/963A537941C44595B0333E7EC7ABE346.jpg[/IMG]
High Beams http://i89.photobucket.com/albums/k2...1/IMG_5660.jpg
Low Beams http://i89.photobucket.com/albums/k2...1/IMG_5659.jpg
Side View http://i89.photobucket.com/albums/k2...IMG_5654-1.jpg
Front View http://i89.photobucket.com/albums/k2...1/IMG_5658.jpg