it is pin #48..orange and white. In the ECU harness behind the passenger side kick panel.

 

thank you guys for all of your help, going to go pull the dash apart again and see what I come up with.. if I run into any more problems i'm just going to smoke a cig and say none of it ever happened.. i'll be ashamed ;[

 

you don't have to pull the dash apart. It shouldn't take 5 minutes to hook this thing up. YOu only have to take out the passenger side kick panel

 

i've already got it routed through the dash and out to the engine bay.. just trying to figure out which wires to hook it up to, and now I know ;]

 

i'm not positive it will work the same on the new edge GT's....but the #48 pin controls the factory tach. THe aftermarket will then read the exact same

 

ok so my tach light has 2 different wires coming from it.. is one a ground and the other goes to the pin #34?

 

i had to have an adaptor for mine....it only took bout 10 mins to hook up

 

99+ HAVE to have the adapter because they are Coil On Plug

 

#48

 

the shift light is what I meant, so that goes to pin #48 too?