GT 500 on the THR dyno...vid up
12-27-2006, 03:35 PM
#1
2nd Gear Member
Thread Starter
Join Date: Dec 2006
Location:
Posts: 194
GT 500 on the THR dyno...vid up
Here is the first of many a vid to come as we build this GT 500 into a true beast for the street. These cars seem to have some killer breeding from the factory, but a good SCT tune can really awake the beast. With some minor bolt ons this one is already at 529.3 rwhp!
http://s22.photobucket.com/albums/b3..._500_07037.flv
http://s22.photobucket.com/albums/b3..._500_07037.flv
12-27-2006, 03:41 PM
#4
6th Gear Member
Join Date: Sep 2005
Location:
Posts: 5,128
RE: GT 500 on the THR dyno...vid up
ha ha nice!! What all has been done to it so far? You said a few bolt ons.. care to share?
I've seen a few of those cars come through my work, and the technicians have to road test them to learn the computer to the blower, and they always come back with a huge grin on their face
I've seen a few of those cars come through my work, and the technicians have to road test them to learn the computer to the blower, and they always come back with a huge grin on their face
12-27-2006, 04:16 PM
#7
2nd Gear Member
Thread Starter
Join Date: Dec 2006
Location:
Posts: 194
RE: GT 500 on the THR dyno...vid up
this one has a Bassani Cat back and our SCT Tune. We have already done 4.10's, rear upper third link & brace, adjustable lowers, panhard replacement with sphericals, severe duty panhard brace, front sway bar delete, Caster Camber plates, JLT Carbon Fiber intake, and are waiting for the rest...
Still to come:
Custom 1 7/8 long tubes (stainless)
matching 3 inch X pipe (stainless)
KB 2.8 Big Bore blower swap
TNT nitrous kit (wet 50-250 shot) gonna stick this on after the new year to spruce things up a bit on the dyno till we get the KB
DPE 20's like my Saleen but in White to go with the red/white theme
Spec twin disc clutch upgrade - 26 spline
Viper Spec 26 spline conversion for the T-56
33 spline rear upgrade
THR Custom Roll Cage 10 pt
Full Length Subframes (welded in)
Some more tuning and whole lotta fun!
Brian
Texas Hot Rods
Still to come:
Custom 1 7/8 long tubes (stainless)
matching 3 inch X pipe (stainless)
KB 2.8 Big Bore blower swap
TNT nitrous kit (wet 50-250 shot) gonna stick this on after the new year to spruce things up a bit on the dyno till we get the KB
DPE 20's like my Saleen but in White to go with the red/white theme
Spec twin disc clutch upgrade - 26 spline
Viper Spec 26 spline conversion for the T-56
33 spline rear upgrade
THR Custom Roll Cage 10 pt
Full Length Subframes (welded in)
Some more tuning and whole lotta fun!
Brian
Texas Hot Rods
12-27-2006, 04:19 PM
#8
2nd Gear Member
Thread Starter
Join Date: Dec 2006
Location:
Posts: 194
RE: GT 500 on the THR dyno...vid up
ORIGINAL: Gumby
Very nice! That is one sweet looking car.
What kind of laptop is that? Looks like an NEC Versa Note.
Very nice! That is one sweet looking car.
What kind of laptop is that? Looks like an NEC Versa Note.
It's a Dell, but works for all our tuning.
