White02GT

What do i have to do to get 300 rwhp w/o nitrous. With the mods i allready have.

code3GT

All the bolt ons, full exhaust, heads and cams.

Quick Shot xMLx

With the mods listed in your signature you don't even have 300 at the crank

White02GT

I think i have close to 300 to the crank

phalcrow

260 stock at the crank, I think those mods are worth close to 40 at the crank, especially the tune. However, I found that bolt on's don't yield as much power as you would think or hope.

yellowgtstang18

Get a ls1[sm=headbang.gif]

Sxynerd

Get rid of the diablo first off! SCT or bust... CAI, Stage 2 cams, Heads, shorties (or longs), Exhaust, underdrive pullies, aluminum flywheel, TB/plen, and maybe a electric water pump! Most important, get a Custom Dyno tune! 300+

JD1969

2002 White Gt Mustang
18 inch 2000 Cobra R rims = 0 HP
Eibach Pro Kit Lowering springs =0 HP
Flowmaster Exhaust = maybe 5 HP
Mac Off road h pipe = again 5 HP if your lucky
BBK cold air Intake =1-3 HP
Diablo Sport Predator Tune ???? possibly a reduction in HP
BBK pulleys= 5 HP
NX Nitrous 100 shot
Motive 3.90 gears =0 HP
Next: MAC L/T = not even done yet.

So thats what maybe 20 HP total over stock. Listen to Code on this onbe he knows what it takes to get a 2V to 300 RWHP. And don't over estimate your mods, 2V cars do not respond so well to typical bolt ons.

redgt2000

i found the predator to be better, do you have any numbers on that topic? sct or pred.?