BLK03GT

So i have been saving for quite some time now and finally the parts are starting to come in. Waiting to be put on in the spring i have LT's, Xpipe no cats, Short Shifter, UDP's, Accufab TB/Plenum, 3.73's, and JLT CAI. What am i forgetting that i will need in the spring for all of this to come together(MAF? Injectors?)....and what other things might you suggest..(remember my goal now is stay n/a and heads/cams are waiting til summer or later!) Thanks guys![/align]

hotrod7687

Only other thing I can see would be a tuner and a dyno tune once you get all those parts installed.

BLK03GT

is Xcal 2 the way to go??? and what numbers do you guys think ill be at with all this stuff installed???(1/4 mile and RWHP)

jacrockett

Aluminum Driveshaft.

Suspension: Start with c/c plates, LCA, subframes, shocks/struts, springs

JayC

You certainly don't want 3.73's if you're staying N/A Some 4.30's will be best but 4.10's are a good combination N/A and power-adder gear

hotrod7687

I have the x-cal. It works great for me.

Do you have a manual or auto? Manual you should be around 260 rwhp, auto about 245-250 rwhp. The cams should be good for approx another 20 rwhp.

oxfordgt

Go with gears and a tuner next. you dont need a maf or injectors since you wont be making that much power 250-260 rwhp. Do you have a cat back yet?

jacrockett

oxfordgt:

do you have any pictures of that suspension?

oxfordgt

Heres a few I could find

[IMG]local://upfiles/37288/E9CD5EBA3583443F983A427070A34FEE.jpg[/IMG]

[IMG]local://upfiles/37288/70044E5535B049DB8E49C1CCBD63428C.jpg[/IMG]

[IMG]local://upfiles/37288/4701EDC36474430CBECCDC7AD32E2543.jpg[/IMG]

[IMG]local://upfiles/37288/1004785A63684E7DAACACEDCCB96C21A.jpg[/IMG]

[IMG]local://upfiles/37288/4A901375D084400A9B36FCC9C91F0C97.jpg[/IMG]

StockD15b

sounds like all you need to do now it give it to me.

PM will be sent with my addy. hehe