For exhaust
#2
RE: For exhaust
I would stay away from flowtech. I bulit a 306 and bought flowtech shorties for it. They came and the collectors werent welded. And a buddy bought a set for his car and i really think they are ****ty. but thats just my 2 cents
[align=left] [/align]
[align=left] [/align]
#3
RE: For exhaust
The best quality headers would be Kooks, Hooker, and SLP (Longtubes)
They are expensive but have much better welds than cheaper LTs such as BBK...not saying BBK is bad, but sometimes the welds are so bad that they need to be re-welded to fill little gaps (from what I've read on forums), while some other people claim BBKs are decent welds that give good power increases
They are expensive but have much better welds than cheaper LTs such as BBK...not saying BBK is bad, but sometimes the welds are so bad that they need to be re-welded to fill little gaps (from what I've read on forums), while some other people claim BBKs are decent welds that give good power increases
Thread
Thread Starter
Forum
Replies
Last Post
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM
tj@steeda
Steeda Autosports
0
09-24-2015 09:18 PM