1600$ quote?! worth it?
#3
RE: 1600$ quote?! worth it?
Sounds really really high to me.
The engine swap should be a direct bolt in. Its not really that hard, espcially if you don't have LTs or anything.
I would shop around. Where are you located?
The engine swap should be a direct bolt in. Its not really that hard, espcially if you don't have LTs or anything.
I would shop around. Where are you located?
#4
RE: 1600$ quote?! worth it?
That sounds about right. Maybe a coulpe hundred higher than what I had been quoted at several shops in my area. Im doing it myself now.
Actually Im not doing a swap, just a removal-rebuild-install. But I was quoted around 1400 for the removal and reinstall.
Actually Im not doing a swap, just a removal-rebuild-install. But I was quoted around 1400 for the removal and reinstall.
#10
RE: 1600$ quote?! worth it?
Its alittle high but not too much...avg i see is @ $1200
heres a write up of how to do it yourself.
http://forums.modulardepot.com/4-6l-...-2v-motor.html
heres a write up of how to do it yourself.
http://forums.modulardepot.com/4-6l-...-2v-motor.html