went to track...p|ssed
03-12-2007, 01:49 AM
#11
5th Gear Member
Join Date: Jul 2006
Location: Charlotte, NC
Posts: 3,151
RE: went to track...p|ssed
ORIGINAL: czwalga00gt
Swapping those cobra wheels I lost .5 mph avg trap speed. So you're wheels dont help your cause.
ORIGINAL: Quick Shot xMLx
Your car is almost stock stop having such high expectations. Hell I can barely cut times better than yours and I have a few more mods+ 5 spd
Your car is almost stock stop having such high expectations. Hell I can barely cut times better than yours and I have a few more mods+ 5 spd
Swapping those cobra wheels I lost .5 mph avg trap speed. So you're wheels dont help your cause.
This was my best run yesterday. A few things which I could've done to knock down a bit off the time but I just suck at shifting[&:]
60'= 1.926
E.T.= 8.962
MPH= 77.215
03-12-2007, 01:52 AM
#12
5th Gear Member
Thread Starter
Join Date: Sep 2006
Location:
Posts: 2,437
RE: went to track...p|ssed
ORIGINAL: rob.d
What rpm are you launching?
What rpm are you launching?
it doesnt matter, i launch right before the stall and still get the same times WTF? higher i launch better time i get but when launching as high as the car will let me i still only manage 14.0s
today i preloaded too high and my tires were spinning on the last yellow light...LOL needless to say that was horrid run..it took me 2 times letting off the gas to get traction LOL...i ran 13.699 that pass...in the 1/8th LOL i consider that my F*ck up pass of the day
03-12-2007, 01:55 AM
#13
5th Gear Member
Join Date: Jul 2004
Location: Pittsburgh/Dayton
Posts: 3,062
RE: went to track...p|ssed
ORIGINAL: Quick Shot xMLx
Well I have some DRs on 15s. I might try pulling the fronts off and throw something light/small on them
This was my best run yesterday. A few things which I could've done to knock down a bit off the time but I just suck at shifting[&:]
60'= 1.926
E.T.= 8.962
MPH= 77.215
ORIGINAL: czwalga00gt
Swapping those cobra wheels I lost .5 mph avg trap speed. So you're wheels dont help your cause.
ORIGINAL: Quick Shot xMLx
Your car is almost stock stop having such high expectations. Hell I can barely cut times better than yours and I have a few more mods+ 5 spd
Your car is almost stock stop having such high expectations. Hell I can barely cut times better than yours and I have a few more mods+ 5 spd
Swapping those cobra wheels I lost .5 mph avg trap speed. So you're wheels dont help your cause.
This was my best run yesterday. A few things which I could've done to knock down a bit off the time but I just suck at shifting[&:]
60'= 1.926
E.T.= 8.962
MPH= 77.215
I have a 1.5 months before I decide what tires i'm going to buy with my suspension. My f1's are gone... i think the nittos on my 2nd set of cobra rims are going on permanently and either going to put ET streets or MT drag radials on the other set. Not sure I want to goto a 15' rim yet.
03-12-2007, 02:07 AM
#15
5th Gear Member
Thread Starter
Join Date: Sep 2006
Location:
Posts: 2,437
RE: went to track...p|ssed
ORIGINAL: Clutch_2000GT
Did you take your spare tire out?
Did you take your spare tire out?
03-12-2007, 02:11 AM
#16
2nd Gear Member
Join Date: Nov 2006
Location:
Posts: 236
RE: went to track...p|ssed
Im not saying that doing that alone will give you a noticeable improvement, but it WILL complement something else you do to either decrease weight or increase power, etc. When your talking about weight reduction every little bit helps
03-12-2007, 02:21 AM
#17
2nd Gear Member
Join Date: Sep 2006
Location: Charlotte, NC
Posts: 308
RE: went to track...p|ssed
ORIGINAL: Quick Shot xMLx
Your car is almost stock stop having such high expectations. Hell I can barely cut times better than yours and I have a few more mods+ 5 spd
Your car is almost stock stop having such high expectations. Hell I can barely cut times better than yours and I have a few more mods+ 5 spd
03-12-2007, 02:33 AM
#18
6th Gear Member
Join Date: Jan 2004
Location: United States
Posts: 12,575
RE: went to track...p|ssed
ORIGINAL: SVTBill
i ran 14.0s all day today...even get the 60' down to 2.1 (2.2 last week) and still couldnt pull it off
i went with 44psi in the fronts and the rears were at 32
tryed: taking spare out
o/d off
no matter what i kept getting 14.0s
WTF CAN I DO TO TAKE .0xx of my freaking e/t?!
btw: im broke [&o]
i ran 14.0s all day today...even get the 60' down to 2.1 (2.2 last week) and still couldnt pull it off
i went with 44psi in the fronts and the rears were at 32
tryed: taking spare out
o/d off
no matter what i kept getting 14.0s
WTF CAN I DO TO TAKE .0xx of my freaking e/t?!
btw: im broke [&o]
Either that or sell a child or something and go with some gears.
03-12-2007, 02:35 AM
#19
5th Gear Member
Thread Starter
Join Date: Sep 2006
Location:
Posts: 2,437
RE: went to track...p|ssed
ORIGINAL: 2000GT4.6
Drag radials FTW
ORIGINAL: SVTBill
i ran 14.0s all day today...even get the 60' down to 2.1 (2.2 last week) and still couldnt pull it off
i went with 44psi in the fronts and the rears were at 32
tryed: taking spare out
o/d off
no matter what i kept getting 14.0s
WTF CAN I DO TO TAKE .0xx of my freaking e/t?!
btw: im broke [&o]
i ran 14.0s all day today...even get the 60' down to 2.1 (2.2 last week) and still couldnt pull it off
i went with 44psi in the fronts and the rears were at 32
tryed: taking spare out
o/d off
no matter what i kept getting 14.0s
WTF CAN I DO TO TAKE .0xx of my freaking e/t?!
btw: im broke [&o]