GolfmanSpeck

Does anyone know how to put the speedo neddle on correctly? I had to remove it to put the white overlays on and I think I put it back wrong. The speed is wrong because of it.[:@]

sprostang

Drive next to someone, do about 30mph or whatever,and push it on at that speed. Easiest way to get it correct.

GolfmanSpeck

ok... I think that is right. Next question is it more likely for a VSS to go out or the speedometer itself?

mvr

with my overlays i just slipped them over the needles... but the needles have been sticking[:@] hopefully i fixed that.

03sixbanger

same here mvr how did you fix it??

mvr

what i did was i took the black bezel part off the top of the cluster, and put layers of ductape behind it to push the overlay back so it doesnt catch the needle. my RPM needle doesnt stick anymore but i think my spedo will stick above 90. but thats ok i dont go that fast alot anyway, if it does stick il put more layers of tape over that part.

sprostang

You can just pull back on the needle a little bit. Problem solved.

03sixbanger

well its the black center piece that rubs on mine

mvr

i tryed that

jmac72187

www.Simcoltd.com for 99-04's.