4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Install help

Thread Tools
 
Search this Thread
 
Old 04-06-2007, 01:11 AM
  #1  
dirtystang04
2nd Gear Member
Thread Starter
 
dirtystang04's Avatar
 
Join Date: Aug 2005
Location:
Posts: 247
Default Install help

This weekend I'll be putting my BBK L/T 's and catted H on. I currently have the stock manifolds and an o/r H. Do I need to buy O2 extensions? I remember when I bought the o/r H i bought MIL eliminators and I bought O2 extensions. Am I going to need another set for the L/T's?? It seems like the front sensors aren't going to reach.. I'm having a brain fart and really don't feel like going outside and looking underneath.
dirtystang04 is offline  
Old 04-06-2007, 01:15 AM
  #2  
oxfordgt
6th Gear Member
 
oxfordgt's Avatar
 
Join Date: May 2006
Location: Ohio
Posts: 6,448
Default RE: Install help

You need 12" extensions for the front O2s. just install the rears and dont plug them in. Tie the wires up out of the way.
oxfordgt is offline  
Old 04-06-2007, 01:16 AM
  #3  
dirtystang04
2nd Gear Member
Thread Starter
 
dirtystang04's Avatar
 
Join Date: Aug 2005
Location:
Posts: 247
Default RE: Install help

If I don't plug the rears in but still leave the MIL's attached will that still work??
dirtystang04 is offline  
Old 04-06-2007, 01:18 AM
  #4  
timeformiller44
4th Gear Member
 
timeformiller44's Avatar
 
Join Date: May 2006
Location: New York
Posts: 1,859
Default RE: Install help

yeah you need O2 i just got done doing my buddies LT's on his auto, you have to cut off the little nipples on the O2's and the etensions to make them fit in the front, does not do any harm. its just a defect.... but yes you need, them for all your 02's fronts and rears...any more questions bout installing long tubes, its all fresh in my mind...by the way when done run open header at first....SOUNDS SICK!!!!!! lol...
timeformiller44 is offline  
Old 04-06-2007, 01:18 AM
  #5  
oxfordgt
6th Gear Member
 
oxfordgt's Avatar
 
Join Date: May 2006
Location: Ohio
Posts: 6,448
Default RE: Install help

Why do you have mils if you had a catted pipe. If you dont have cats on the new midpipe you dont need the rear O2s.
oxfordgt is offline  
Old 04-06-2007, 01:28 AM
  #6  
dirtystang04
2nd Gear Member
Thread Starter
 
dirtystang04's Avatar
 
Join Date: Aug 2005
Location:
Posts: 247
Default RE: Install help

I have the MIL's for the o/r H thats on there now. So I guess I have to buy another pair of extensions..
dirtystang04 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mtgldr
S197 Handling Section
5
02-03-2024 09:00 PM
BOBCATJACK
New Member Area
3
09-14-2015 02:18 AM
tj@steeda
Steeda Autosports
0
09-10-2015 08:39 PM



Quick Reply: Install help



All times are GMT -5. The time now is 07:21 AM.