Safe 60'
04-10-2007, 06:23 PM
#1
4th Gear Member
Thread Starter
Join Date: Jul 2006
Location: N. Ft. Myers, Fl
Posts: 1,329
Safe 60'
I have a stock drivetrain and i am gonna get some mickey thompson ET Street Radials and i would like to know on my stock rear what safe 60' times and what rpm would be safe to launch at? Also i need a new clutch, I AM gonna get a spec. where is the best & cheapest place to get a Spec Stg 2+ at?
04-10-2007, 06:51 PM
#3
5th Gear Member
Join Date: Apr 2005
Location:
Posts: 2,613
RE: Safe 60'
It'll be best to go ahead and get your axle tubes and stuff welded, a built rear will help alot too. I'd say once you get into 1.7 60's without upgrading anything stuff will start breaking, but all cars are different.
04-10-2007, 07:09 PM
#4
4th Gear Member
Thread Starter
Join Date: Jul 2006
Location: N. Ft. Myers, Fl
Posts: 1,329
RE: Safe 60'
ORIGINAL: jpmustanggt
It'll be best to go ahead and get your axle tubes and stuff welded, a built rear will help alot too. I'd say once you get into 1.7 60's without upgrading anything stuff will start breaking, but all cars are different.
It'll be best to go ahead and get your axle tubes and stuff welded, a built rear will help alot too. I'd say once you get into 1.7 60's without upgrading anything stuff will start breaking, but all cars are different.
