RipTide7

Im just wondering what it would take for an auto npi 98 mustang gt to run mid-low 13s. My first run stock was 15.3 with a sub box, spare tire, jack and full tank of gas, (was also my first time at the track.) So now i have a PI intake manifold, and an O/R H pipe and 4.10s waiting to be installed. Assuming i get a tuner and some DRs, what else is needed? And im not doing heads... yet.

mustangman02232

PI swap and nitrous, blower, stroker kit, hopes and dreams

droptoppony

PI Intake & cams along with your 4.10's and a nice 3200 stall TQ Conv will get you damn close.
Removing the spare etc and less then a 1/4 tank will also help...gas is heavy.

RipTide7

Cool, so i might be around there with some pi cams and a tq converter to?

1BAD3V

That would probably get you there, but you might aswell get some heads just to be sure.

impaled

what kind of gains are expected just from the pi intake manifold without the pi cams and heads?

djb1187

All you really neeed is full bolt on, full PI Swap, some nice sticky tires, the stall and shift kit, 4.10 gears, and the most effective mod....the good driver mod

badboystangGT

my friend in his 98 NPI and has an allen supercharger 6lbspsi, intercooled,its anauto, gears and exhaust and pullys runs low 13's

djb1187

he has pulleys and a supercharger??? Tell him if he puts his stock pulleys back on his car would run better...

badboystangGT

ten four i'll let him know! but THR sold him that kit and installedit and they screwed up his car really bad brian told him to run 19lb injectors on a blown motor and now he was major detonation!