TECH!!! How to install your Nitrous Bottle Heater
#1
TECH!!! How to install your Nitrous Bottle Heater
Well, I know this won't really be used very much, b/c there aren't alot of us 4.6 guys that are on the juice. But I figured this could be a universal tech sticky, if you guys like it.
I have the Dynotune Nitrous Bottle heater, which is pressure regulated. The install really wasnt that bad. I've ran all of the wires(which took forever!). All I have to do is mount the fuse and switch. I "hot wired" it for a sec, just to make sure everything was in place, and it got hot, so at least I didnt screw up too bad. lol. I have lots of pics, and an idea of a full step by step write up, but I'm gonna put them up first thing tomorrow.
"Under construction"
I have the Dynotune Nitrous Bottle heater, which is pressure regulated. The install really wasnt that bad. I've ran all of the wires(which took forever!). All I have to do is mount the fuse and switch. I "hot wired" it for a sec, just to make sure everything was in place, and it got hot, so at least I didnt screw up too bad. lol. I have lots of pics, and an idea of a full step by step write up, but I'm gonna put them up first thing tomorrow.
"Under construction"
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
09-10-2015 08:39 PM