Im going to be ordering the H&R Super Sport springs soon. I was going to go with the Pro kit but i feel like its not enough for what im looking for. I have been looking at some old post and saw i will need CC plates, So i think i will be getting these http://www.americanmuscle.com/maximu...tes-94-04.htmlor the JM ones which are a little cheaper. With these will I be ok or is there anything else? Like shocks or sway bar.

 

MM is grade A stuff, you def need caster camber plates, and you dont have to do it right away but your going to eventually have to replace the shocks/struts cause its greater than a 1.5" drop

 

mm c/c plates are one of the best and you should buy some aftermarket shocks/struts. the tokico hd shocks/struts are great and inexpensive. lol and another benefit with tokico hd's are that they use the same blue as the supersport springs so everything matches.

 

Where is a good place to purchase the tokico shocks/struts?

 

I suggest www.stangsuspension.com , I'd just get the springs and shocks and c/c plates from there if I were you.