Intake Manifold Replacement 99-04 GT
#22
RE: Intake Manifold Replacement 99-04 GT
as for PI intake manifold , this is quote from professional-products.com:
" Special Note: Note: On a stock engine, this manifold will substantially improve the mid-range power and torque. To realize the full advantage of this manifold, which makes its maximum power increase at approximately 6,300 rpm, a cam change is required. The stock cams will not allow the engine to rev this high. With a cam change, this manifold will produce in excess of 20 more rear wheel horsepower. This is over the power realized with a cam change and the stock manifold."
" Special Note: Note: On a stock engine, this manifold will substantially improve the mid-range power and torque. To realize the full advantage of this manifold, which makes its maximum power increase at approximately 6,300 rpm, a cam change is required. The stock cams will not allow the engine to rev this high. With a cam change, this manifold will produce in excess of 20 more rear wheel horsepower. This is over the power realized with a cam change and the stock manifold."
#23
RE: Intake Manifold Replacement 99-04 GT
o.k. I did epoxy it for now and add coolant to get byandI'm shopping around for the part. The best I found is on Ebay for $197 incl. shippingand all the gaskets and bracket. Anybody can find a better price ? Let me know please.
Thread
Thread Starter
Forum
Replies
Last Post
Calizic
4.6L (1996-2004 Modular) Mustang
5
08-28-2015 01:46 PM