SikSide00GT

So i want to drop the stang. However i want to know if my back tires will rub. I have 285/35/18 in the rear and 245/45/17 in the front.

The H&R springs i'm getting drop the car 1.75" in the front and 1.6 in the rear.

Does anyone know if my back wheels will rub or hit the wheel well?

Also will my SLP resonaters from the exhaust scrape?

chewie

I suggest you get under your car and measure it out, not too hard.

SikSide00GT

no **** chewie really well thanks for the advice you redneck.

chewie

Then what the fu*k are you asking for? Oh I get it, you don't want to do any of your own research and want to be "spoon fed".

SikSide00GT

wow last time i checked this website is for people who have questions right? or to share information. If you dont have an answer then why post anything?

chewie

You are correct...maybe if you stated something to the fact that you attempted to get under your own car to measure it out but couldn't fit, not comfortable with the measurements you came up with, or any otherreason...you would have gotten a helpful response.

I apologize for posting on your thread and let someone else spoon feed you.

6charger8

online cat fight

amoosenamedhank

[sm=icon_rofl.gif]
To answer the question I have 295/35/18 in the rear and 265/35/18 in the front with a similar drop and no rub issues but every car is a little different. If you really want to know for sure though you could go and measure.

03greyGT

I am also running a 295 in the back with a 2 inch drop, and no rubbing issues

dye

Im running 315's with SLP LM'2, with H&R Supersport springs and have only rub once. My car hit a very bad pot hole and it just barely rubbed.