99GTvert

I have a problem. I had adjusted my headlights too high one night, and now I get 1 out of 9 drivers on the road flashing their brights at me every goddamn night. The problem is with adjusting them now is that I stripped all the rubber crap inside, so what else can I do to adjust my headlights?

josh662234

i have the same exact problem. i cant adjust my cheap A$$ AM headlights. that screw driver/allen spot is all stripped out. who knows what that bottom adjustment is for????????//

99GTvert

Maybe what we can do is try to get glue or something down there, then when it hardens up try to twist that sumbitch because this is really frustrating when I'm blinding others unintentionally.

fiad06

That happened with my cheap AM headlights...they could not adjust down because they were stripped...so I bought new lights from blueoval

jersey98gt

blue oval > AM?????

josh662234

that's a good idea. . . maybe superglue a screwdriver bit in there or something. . . but it would look so ghetto

4.698GT

Try pushing down on the light while you tighten the adjustment?

99GTvert

heh, at this point I could care less when I pop the hood. Maybe I'll just scrape off as much of it as I can if I have to go that route.

I got my smoked headlights from BlueOvalInd. They are great, you can't go wrong from either place although the Blue Oval was cheaper.

xsoutherngun89x

hey can yall help me with a question, I just bought a 98 GT and i need to adjust not only the beam, but the headlight itself. Anybody got any pics that could help explain it to me? Im alot better at workin on the engines than messing with the electronics, lol.

p.s. my alarm system isnt workin yet, the fuse is good. any suggestions??