help on installing c/c plates, ball joints and bushings
10-04-2007, 12:39 AM
#1
5th Gear Member
Thread Starter
Join Date: Mar 2006
Location: MD, but NC for school
Posts: 2,374
help on installing c/c plates, ball joints and bushings
hey everyone early next week im prob gonna order the following.....
2 x 275/40/17 Sumitomo Tires
2 x 315/35/17 Sumitomo Tires
1 x J&M C/C Plates
1 x Polyurethane Steering Rack Bushings
1 x Steeda X2 Ball Joints
I know the tires suck but its all i can afford.I've have the same ones on there now and their fine for what i drive(DD)
The bushings shouldn't be too hard to put in, my frined has done the ball joints(so that shouldnt be too hard either), I'm just not too sure about the install of the C/C plates, of course im still getting it aligned after its all said and done.
So any information on install of any of these things(esp. C/C Plates)i.e. write ups, personal experience, anything would be helpful.
Thanks a lot
-Pat
2 x 275/40/17 Sumitomo Tires
2 x 315/35/17 Sumitomo Tires
1 x J&M C/C Plates
1 x Polyurethane Steering Rack Bushings
1 x Steeda X2 Ball Joints
I know the tires suck but its all i can afford.I've have the same ones on there now and their fine for what i drive(DD)
The bushings shouldn't be too hard to put in, my frined has done the ball joints(so that shouldnt be too hard either), I'm just not too sure about the install of the C/C plates, of course im still getting it aligned after its all said and done.
So any information on install of any of these things(esp. C/C Plates)i.e. write ups, personal experience, anything would be helpful.
Thanks a lot
-Pat
Thread
Thread Starter
Forum
Replies
Last Post
