short throw shifter
#1
short throw shifter
hey guys im new here. just wondering how hard it is to install a short throw shifter. is this something i can do myself...
[IMG]local://upfiles/87563/9F4FC74091D84EB6A9AB09C422AFE638.jpg[/IMG]
[IMG]local://upfiles/87563/9F4FC74091D84EB6A9AB09C422AFE638.jpg[/IMG]
#2
RE: short throw shifter
if you have a couple sockets, about an hour, and some patience, it's one of the easiest installs you can do. the entire install is done from your driver's seat.
it's just a matter of taking apart your shifter bezel and having the right size sockets for the job. if i recall you'll need an 8, 10, and 13mm socket maybe a 6" extention to make things a LOT easier on your knuckles. other than that have a putty scraper to get rid of old gasket material.
good looking car, btw.
it's just a matter of taking apart your shifter bezel and having the right size sockets for the job. if i recall you'll need an 8, 10, and 13mm socket maybe a 6" extention to make things a LOT easier on your knuckles. other than that have a putty scraper to get rid of old gasket material.
good looking car, btw.
#4
RE: short throw shifter
ok thnx guys! i have a mastercraft socket set so im good to go. im looking at the roush short throw from stage 3 motor sports for $179. is this a good deal. doesnt include the handle. any suggestions on a good brand?
#10
RE: short throw shifter
What Tranny do the Bullits have?
I know their 01.... is it the T45 or 3650?
I had a B&M on my 3650 and i loved it.. Ive Tried the Steeda one didnt like it.. Nvr Tried MGW yett maybee for my TKO....
I know their 01.... is it the T45 or 3650?
I had a B&M on my 3650 and i loved it.. Ive Tried the Steeda one didnt like it.. Nvr Tried MGW yett maybee for my TKO....