4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

TB and plenum problem, need answers....

Thread Tools
 
Search this Thread
 
Old 04-16-2008, 08:47 PM
  #1  
Dirty02gt
Thread Starter
 
Dirty02gt's Avatar
 
Join Date: Apr 2008
Posts: 3
Default TB and plenum problem, need answers....

Hey guys im new to the board, and found this site (and others ..but i like this site) looking for a answer to my problem. I purchased a Pro Products 75mm TB & Plenum, and have installed them on my 02 GT with auto tranny. Everything installed easy as can be but now the car idles great but if you rev the rpms the car falls on its face, the rpms fall all the way off. I disconnected the battery while i did the swap hooked it back up started the car and let it run for about 15mins, then shut it off and resterted it. I reved it up to see if everything was ok and it died......what am i missing here...ohh and i have a diablosport tune in the car could that have anything to do with it?....any help would be nice ...thanks
Dirty02gt is offline  
Old 04-16-2008, 11:03 PM
  #2  
Jbauer
4th Gear Member
 
Jbauer's Avatar
 
Join Date: Aug 2007
Posts: 1,106
Default RE: TB and plenum problem, need answers....

double check your vaccum lines and fittings
Jbauer is offline  
Old 04-17-2008, 12:19 AM
  #3  
TOOT
3rd Gear Member
 
TOOT's Avatar
 
Join Date: Jun 2006
Location: Pa
Posts: 643
Default RE: TB and plenum problem, need answers....

agreed sounds like something isn't fully attached
TOOT is offline  
Old 04-17-2008, 09:58 AM
  #4  
Dirty02gt
Thread Starter
 
Dirty02gt's Avatar
 
Join Date: Apr 2008
Posts: 3
Default RE: TB and plenum problem, need answers....

ok i have check all the lines and they seem secure. even messed with the TPS and it seems fine............ i have no clue what the deal is....hmm any other ideas?
Dirty02gt is offline  
Old 04-17-2008, 03:29 PM
  #5  
Dirty02gt
Thread Starter
 
Dirty02gt's Avatar
 
Join Date: Apr 2008
Posts: 3
Default RE: TB and plenum problem, need answers....

ok well i went and bought a new TPS and that seems to have fixed the problem....thanks for the advice!
Dirty02gt is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Seanam
V6 S197 General Discussion
5
10-04-2015 10:15 AM
mdj89
5.0L (1979-1995) Mustang
7
09-23-2015 08:49 AM
stangin1996gt
4.6L (1996-2004 Modular) Mustang
0
09-21-2015 11:01 AM
Big Al's 03
Mach 1 Section
4
09-21-2015 07:59 AM
GimpyHSHS
4.6L (1996-2004 Modular) Mustang
3
09-18-2015 12:27 PM



Quick Reply: TB and plenum problem, need answers....



All times are GMT -5. The time now is 09:44 AM.