identify these headers?
04-19-2008, 05:24 PM
#3
3rd Gear Member
Join Date: Mar 2007
Location: Where gunshots are more common than birds chirping
Posts: 504
RE: identify these headers?
honestly those look more like BBK's than MACs. MAC primaries are smallish (1 3/8) and the tubes don't bend back to be equal length (like it looks like for the #4 primary in that pic). I could be wrong though.
04-19-2008, 05:46 PM
#4
5th Gear Member
Thread Starter
Join Date: Aug 2007
Location:
Posts: 3,189
RE: identify these headers?
they definately arent bbk's. this is the how-to for LT install on a new edge GT and he used BBK headers. the EGR fitting is on a different tube on mine, his pipes bend alot differently too. they look exactly like the headers on macs website but they dont always show the exact picture on websites (i.e. they will usually have the same header picture for the GT and the 4v's with a note that says "actual product may vary").
anyone got a pic of where the EGR is on mac longtubes? as much as i love my car its never going to be fast enuff so im selling all the car parts ive accumulated to buy a crotch rocket and i dont wanna falsely advertise something. i'm 99.999% sure these are mac lt's for 99-04 and they were said to bepreviously installed on a 99 GT but i want to be positive. bought them from some kid that my buddy works with and he isnt the most knowledgable about cars.
picture of driver side BBK header on the how-to:
http://www.fnsweet.com/garage/lt_install/drvrheader.jpg
picture of my drivers side:
anyone got a pic of where the EGR is on mac longtubes? as much as i love my car its never going to be fast enuff so im selling all the car parts ive accumulated to buy a crotch rocket and i dont wanna falsely advertise something. i'm 99.999% sure these are mac lt's for 99-04 and they were said to bepreviously installed on a 99 GT but i want to be positive. bought them from some kid that my buddy works with and he isnt the most knowledgable about cars.
picture of driver side BBK header on the how-to:
http://www.fnsweet.com/garage/lt_install/drvrheader.jpg
picture of my drivers side:
04-19-2008, 06:01 PM
#6
5th Gear Member
Thread Starter
Join Date: Aug 2007
Location:
Posts: 3,189
RE: identify these headers?
hmm...well i doubt mac has a different companies header pictured on their website because:
macs website:
http://www.macperformance.com/store/...Product_ID=886
look at the top picture. EGR fitting is on the third one from the left, bending up pointing to the right of the 4th one.
heres a picture of mine, nearly the same angle:
EGR is in the same spot. maybe they changed their design a little somewhere through the years?
macs website:
http://www.macperformance.com/store/...Product_ID=886
look at the top picture. EGR fitting is on the third one from the left, bending up pointing to the right of the 4th one.
heres a picture of mine, nearly the same angle:
EGR is in the same spot. maybe they changed their design a little somewhere through the years?
] beat me to it
04-19-2008, 06:59 PM
#8
3rd Gear Member
Join Date: Jan 2006
Location: North Carolina
Posts: 903
RE: identify these headers?
Looks like MAC longtubes to me. They are the only longtubes for 2 valves that I noticed had individual flanges instead of one flange connecting all fourprimaries to the head.
04-19-2008, 07:15 PM
#9
5th Gear Member
Thread Starter
Join Date: Aug 2007
Location:
Posts: 3,189
RE: identify these headers?
ORIGINAL: bluepony4.6
Looks like MAC longtubes to me. They are the only longtubes for 2 valves that I noticed had individual flanges instead of one flange connecting all fourprimaries to the head.
Looks like MAC longtubes to me. They are the only longtubes for 2 valves that I noticed had individual flanges instead of one flange connecting all fourprimaries to the head.
i was told they were macs for a 2v just wanted to confirm, everything ive seen backs it up.
Thread
Thread Starter
Forum
Replies
Last Post
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM
trashxtrash
4.6L (1996-2004 Modular) Mustang
4
09-20-2015 10:49 PM