Recommendation for power steering coupler
#1
Recommendation for power steering coupler
So for my intercooler install, I had to relocate the power steering cooler using extension hoses provided by Procharger. It uses a plastic male/male coupler and two hose clamps to connect the old hose to the extension. Worked fine for quite a while, but now it blows the coupler off after very limited driving, causing a loss of power steering fluild and therefore power steering and power brakes. What would be a better way to couple these two rubber 5/8" hoses? Is the plastic coupler just too slick and needs to be replaced by a metal coupler?
Thread
Thread Starter
Forum
Replies
Last Post
uberstang1
Classic Mustangs (Tech)
6
09-20-2015 06:42 PM
tj@steeda
Steeda Autosports
0
09-08-2015 11:50 AM