about to install U/D pulleys any suggestions???
#12
RE: about to install U/D pulleys any suggestions???
ORIGINAL: Dan02GT
I believe they offer a dampner/pulley combination as does March. I could be wrong though.
The02GT, you're right. Every HP counts, but when you'll be sweating and busting knuckles or hard earned money on a poor product, if you only spent $30 more you could have yourself a set of UDP's that will net you significantly more HP than piggy-backs.
I believe they offer a dampner/pulley combination as does March. I could be wrong though.
The02GT, you're right. Every HP counts, but when you'll be sweating and busting knuckles or hard earned money on a poor product, if you only spent $30 more you could have yourself a set of UDP's that will net you significantly more HP than piggy-backs.
#13
RE: about to install U/D pulleys any suggestions???
quote:
ORIGINAL: Dan02GT
You don't NEED an impact gun, it'll just take half a lifetime to get it off.
Anyways, before you install the pulleys and possibly waste your time for a handfull of HP if that...make sure you don' thave PIGGY BACK pulleys. I hate myself every day for doing it, but I guess it's okay, I plan on having a SC soon.
BBK ARE piggy back. i have a set of those i never bothered to put on.
so... does that mean i have piggy back pulleys, and im not seeing the gains in hp as if i went with a non piggy back brand??
ORIGINAL: Dan02GT
You don't NEED an impact gun, it'll just take half a lifetime to get it off.
Anyways, before you install the pulleys and possibly waste your time for a handfull of HP if that...make sure you don' thave PIGGY BACK pulleys. I hate myself every day for doing it, but I guess it's okay, I plan on having a SC soon.
BBK ARE piggy back. i have a set of those i never bothered to put on.
so... does that mean i have piggy back pulleys, and im not seeing the gains in hp as if i went with a non piggy back brand??
#14
RE: about to install U/D pulleys any suggestions???
ORIGINAL: 97slobra
quote:
ORIGINAL: Dan02GT
You don't NEED an impact gun, it'll just take half a lifetime to get it off.
Anyways, before you install the pulleys and possibly waste your time for a handfull of HP if that...make sure you don' thave PIGGY BACK pulleys. I hate myself every day for doing it, but I guess it's okay, I plan on having a SC soon.
BBK ARE piggy back. i have a set of those i never bothered to put on.
so... does that mean i have piggy back pulleys, and im not seeing the gains in hp as if i went with a non piggy back brand??
quote:
ORIGINAL: Dan02GT
You don't NEED an impact gun, it'll just take half a lifetime to get it off.
Anyways, before you install the pulleys and possibly waste your time for a handfull of HP if that...make sure you don' thave PIGGY BACK pulleys. I hate myself every day for doing it, but I guess it's okay, I plan on having a SC soon.
BBK ARE piggy back. i have a set of those i never bothered to put on.
so... does that mean i have piggy back pulleys, and im not seeing the gains in hp as if i went with a non piggy back brand??
#15
RE: about to install U/D pulleys any suggestions???
you'll still see about the same gains, they're just gonna be a bitch and some change to install. that's why i never put mine on. glad i didn't since i got a blower anyway though.
#16
RE: about to install U/D pulleys any suggestions???
I'm about to start putting my pulleys on and I was wondering does it matter where I jack up the front? I thought right under the engine was a good spot because there's a nice flat area there but I didn't wanna do anything stupid. I could use an answer pretty quick! Thanks guys.
#18
RE: about to install U/D pulleys any suggestions???
yea i got on they werent too bad had to take out the fan which wasnt too bad i felt some gains it revs quicker but i put a throttle body on at the same time so i dunno which i got the most of but between the two i definently felt some gains feels stronger through the entire power band
Thread
Thread Starter
Forum
Replies
Last Post