iMTB

I LOVE IT! I had no idea what to do at first and basically did a burnout off the line, but then I messed with it and got my best 60' ever in the mustang (by far).

I used it for the first time at the track today.

1st Run:
http://www.youtube.com/watch?v=avoTEOCWQ5M

60' Horrible
330 Alot
1/8th Slow@82.03
1000 Too Many Seconds
1/4th Alot of Seconds@102.9


2nd Run:
http://www.youtube.com/watch?v=ylSofcu3nGw

60' 2.196
330 5.960
1/8th 8.954@82.61
1000 11.515
1/4th 13.689@103.36

3rd Run:
http://www.youtube.com/watch?v=9gIqWd52inI

60' 2.072
330 5.784
1/8th 8.776@82.32
1000 11.346
1/4th 13.525@103.09

It was very hot out today so the trap speeds kinda suck, but the ets are good for me.

cliffyk

+1, I programmed it into the tune with DeltaForce. Like you I set it too high (2800 rpm) at first, but once dialed in!!!

livefast1

if you have an xcal 2 enjoy it while it lasts. mine lost the function after the first day. more than a few others have had this problem also. msd 2 step ftw.

Mustang_NTriangle

Dude nice runs.

Chris98Gt

At least it works on the new edge cars sometimes. The sct 2 step doesn't even work on the sn95s.

Jbauer

im taking it to mph tuning next week so they can program a 2 step on to my SCT tuner.. Dont EVER buy a tune from Mustangs Unlimited sucks big time, you cant adjust any of the parameters with the tune they write

Chris98Gt

If your car is a sn95 platform mph cant use the sct 2 step either thats who I had try to set mine up. Also mph locked my tune when they tuned it with the procharger I had to get him to email me an unlocked version.

Matt@MU

Hello,

The tunes that we program are the basic "canned" tunes provided by SCT. We do not have a dyno at our facility, and always recommend that fine tuning be done by a facility that has one. The three tunes we provide, do improve performance over stock. However there are way too many parameters in tuning for us to do without a dyno on the premises.

Thanks,
Matt @ Mustangs Unlimited