BlackStang31

has anyone had a problem with scraping or draging when you have longtubes and lowering springs?

StriderTacticaL

Appearently you'll be really close....I think a member here who goes by BlknWht GT or something has longtubes with Eibach sportlines lol

BlackStang31

ye ai got the longtubes in and they look like they are gonna be low. then add lowering springs = possible scrap

mrtstang

I run a Eibach Pro Kit (1.5 in. drop) and i have plenty of room. It looks like i could drop another 1/2 in. without any problems too.

I run BBK long tubes btw.

ScorpiuS

Ya if you have the H&R Sports or Eibach Pro Kit most people don't have much of an issue, but if you have anything over 1.5" scrapage is highly likely!

Sxynerd

Some people have no clue....

My mac Long tubes tuck better than my stock H pipe and my o/r H pipe.

If you can't tell in the pictures, I still have my stock cross brace connected and the Mac Long Tubes tuck quite nicely. I couldn't hit the road with my long tubes if I tried......




And this is how much i'm dropped.

mustangman281

You can see how low my car is (much lower then any lower springs) and I have yet to ever scrape my exhaust.

mvr

also have the macs here. if i scrape anything its the rear resonators as they hang a bit low.

i actually been able to tuck my x up more since i took this pic. cars lowered a inch and a half in the front.



and yes i know, the fram filter is gone.

DreamerGT

yeah mine is tucked up under the car really good. If anything gets hit its the SLP's in the back.

grogan

im running coil springs on the front with my car 3 inches off the ground and i dont hit even on speed bumps.. im running 3 inch exhaust on longtube hooker headers.