foru2nv4

I need help finding a company that sells a pulley for a saleen series IV supercharger or stage 4 supercharger. I went to a smaller pulley 2.91" pulley on the supercharger with a smaller gator poly v-belt grip but during full throttle(gas pedal to floor) I get a screaming sound from under the hood which means its slipping cause my boost gauge drops, check engine light flashes at me and when I let off the gas the light stops flashing at me about 5 secs. later and car runs find(when light is flashing I lose half my power). This use to not happen at all with the stock 3.27 gears. But I have put in 4.10 gears thanks to an old school race car driver showin me how it is done this problem has started. My guess is the pulley or belt is slipping because I am going thru my power curve(RPM) to fast not giving the SC time to help burn the fuel cuz belt is slippin therefore the flashing check engine light. Does anyone know what kind of pulley I can get that will not lose grip during acceleration? Please give me company names that make a pulley or can for my supercharger.


Thanks

lizzyfan

http://www.reichardracing.com/pulleys.php

foru2nv4

I have tried contacting that company you mentioned thru e-mail but I get no reply back from them. What is the best way to get a hold of them to build me that pulley I need, that will have grip?

lizzyfan

Give em a call