8 PSI on Stock Motor
#1
8 PSI on Stock Motor
I found this cheap supercharger kit that puts out 8 PSI of boost and before i bought it i just wanted to make sure the engine could handle 8 psi. Only thing ive done to the car is Catback, Intake, Chip.
#5
#7
RE: 8 PSI on Stock Motor
Yup talked to mustang specialists and they sell powerdyne, paxton and vortech and they talked to me about the paxton and vortech and i asked about the powerdyne and the guys told me there junk and they dont like to sell anyone them.
#9
RE: 8 PSI on Stock Motor
ORIGINAL: nanaki
yeah, it can handle 8psi. i'm running 10psi just fine.
yeah, it can handle 8psi. i'm running 10psi just fine.
#10
RE: 8 PSI on Stock Motor
ORIGINAL: V8MustangPride
Is your car intercooled or non, and are you still on the stock bottom end? Also if so how is your bottom end holding up and what other modifications do you have done to your car.
ORIGINAL: nanaki
yeah, it can handle 8psi. i'm running 10psi just fine.
yeah, it can handle 8psi. i'm running 10psi just fine.
Thread
Thread Starter
Forum
Replies
Last Post